China's earliest production and processing of aluminum veneer ceiling, one of the curtain wall manufacturers
Aluminum Honeycomb Panel EquipmentAviation technology is applied to civil construction, vehicle and ship decoration. It is the application of aviation and aerospace materials in the field of civil construction.
The inner layer is a special hexagonal aluminum honeycomb, made of aluminum alloy with hardness up to H19 The composition, as a core plate adhered in a sandwich structure, bears pressure in the tangential direction. These mutually restrained dense honeycombs are like many small I-beams, which can be dispersed to bear the pressure from the direction of the panel, so that the plate is evenly stressed and ensures that the panel can still maintain a high flatness in a large area.
aluminum corrugated boardIs the use of aluminum after rolling cold bending into a variety of waveform plate, it is suitable for industrial and civil buildings, warehouses and interior and exterior wall decoration, with light weight, high strength, fire prevention, long life and other characteristics, has been widely applied.
The installation is installed on both sides without mechanical damage. The sliding installation buckle system allows thermal expansion and contraction, and the anti-slip buckle at the bottom of the board can control the expansion direction of the board. 25MM hidden glue joint system is beautiful and has self-cleaning function.
Aluminum honeycomb panel equipment curtain wall with its light weight, high strength, stiffness and many other advantages, has been widely used in high-rise building exterior wall decoration. The aluminum honeycomb panel with a total thickness of 15mm and a panel floor of 1.0mm is only 6Khg/㎡.
The weight of honeycomb panel with the same rigidity is only 1/5 of that of aluminum veneer and 1/10 of that of steel plate. The interconnected aluminum honeycomb cores are like countless I-beams. The core layers are distributed and fixed in the whole plate surface to make the plate more stable. Its wind pressure resistance is much higher than that of aluminum veneer and aluminum veneer. It is not easy to deform and has good flatness, even if the cell size of honeycomb panel is large.
arc honeycomb panelFeatures: sound insulation, heat insulation, fire prevention, shockproof function outstanding.
Characteristics of aluminum honeycomb panel equipment
(1) Light weight, high strength, high rigidity, stable structure and good wind pressure resistance
(2) Sound insulation, heat insulation, fire prevention and shockproof functions can be outstanding
(3) the surface has amazing flatness, and color diversity
(4) strong decorative, easy to install, fast
Aluminum honeycomb panel equipment has the characteristics of light weight, low radiation pollution, saving stone materials, large panel size, etc., can be used for ceiling, curtain wall, interior wall, ground, etc., more and more widely used in buildings, vehicles, ships and other decoration.
stainless steel honeycomb plateEasy and fast installation.
Recommended:The scope of application of single-sided corrugated aluminum plate