Definition of aluminum honeycomb panel

aluminum honeycomb panel是指经过铬化等处理后，再采用氟碳喷涂技术，加工形成的建筑装饰材料。氟碳涂料主要是指聚偏氟乙烯树脂(KANAR500), divided into primer, topcoat, varnish three. The spraying process is generally divided into two coating, three coating or four coating. Fluorocarbon coating has excellent corrosion resistance and weather resistance, can resist acid rain, salt spray and various air pollutants, excellent cold and heat resistance, can resist strong ultraviolet radiation, can maintain long-term non-fading, non-chalking, long service life.

aluminum honeycomb panel是指经过铬化等处理后，再采用氟碳喷涂技术，加工形成的建筑装饰材料。氟碳涂料主要是指聚偏氟乙烯树脂(KANAR500), divided into primer, topcoat, varnish three. The spraying process is generally divided into two coating, three coating or four coating. Fluorocarbon coating has excellent corrosion resistance and weather resistance, can resist acid rain, salt spray and various air pollutants, excellent cold and heat resistance, can resist strong ultraviolet radiation, can maintain long-term non-fading, non-chalking, long service life.

铝单板其构造主要由面板、加强筋和角码等部件组成。成型最大工件尺寸可达8000mm×1800mm(L×W)Coatings used in the United StatesPPG, American ValsparValsparAkzoNobel, NetherlandsAkzoNobel, KoreaKCCThe coating is divided into two coats and one bake, three coats and two bakes, and its coating performance reachesAAMA(American Building Manufacturing Association)和ASCAAmerican Architectural Spraying Association)的AAMA2605-98Standard. Normal thickness:1.5mm、2.0mm、2.5mm、3.0mm. Common specifications:600*600mm、600*1200mm

Recommended article:

Aluminum veneer dry hanging construction scheme

/Article/lvdanbanganguashigon_1.html

Sound insulation effect of aluminum honeycomb panel

/Article/lvfengwobandegeyinxi_1.html

Introduction of aluminum veneer characteristics

/Article/lvdanbantexingjiesha_1.html