Introduction of aluminum veneer characteristics

Aluminum veneerMaterial and structure of curtain wall:

Aluminum veneer幕墙采用优质高强度铝合金板材，其常用厚度为1.5mm、2.0mm、2.5mm、3.0mm、4.0mm、5.0mm, the model is3003, the state isH24. The maximum size of conventional materials is12.0mm × 24.0mm. Its structure is mainly composed of panels, stiffeners and corner codes. The corner code can be directly bent and stamped from the panel, or riveted on the small edge of the panel. The reinforcement is connected with the electric welding screws behind the plate surface, making it a solid whole, greatly enhancing the strength and rigidity of the aluminum veneer curtain wall, and ensuring the flatness and wind resistance and earthquake resistance in long-term use. If sound insulation is required, high-efficiency sound insulation materials can be installed on the inside of the aluminum plate.

Surface treatment of aluminum veneer curtain wall

Aluminum veneer幕墙表面一般经过铬化等前处理后，再采用氟碳喷涂处理。氟碳涂料面漆和清漆的聚偏氟乙烯树脂（KANAR500). Generally divided into two coated, three coated or four coated. Fluorocarbon coating has excellent corrosion resistance and weather resistance, can resist acid rain, salt spray and various air pollutants, excellent cold and heat resistance, can resist strong ultraviolet radiation, can maintain long-term non-fading, non-chalking, long service life.

Features of aluminum veneer curtain wall panel:

Aluminum veneer幕墙板钢性好、重量轻、强度高。 Aluminum veneer幕墙板耐腐蚀性能好，氟碳漆可达25Years do not leg color.

Aluminum veneer curtain wall plate technology is good.

Aluminum veneer curtain wall panel is not easy to stain

The installation and construction of aluminum veneer curtain wall is convenient and quick. The aluminum plate is formed in the factory, and the construction site does not need to be cut and simply fixed.

Aluminum veneer幕墙板可回收再利用，有利环保。铝板可100 percentRecycling, recycling value is higher.

Scope of application

Aluminum veneer curtain wall is suitable for decoration of interior and exterior walls, lobby facade, column decoration, elevated corridor, pedestrian bridge, elevator wrapping, balcony packaging, advertising signs, indoor special-shaped ceiling, etc.