Installation of aluminum honeycomb panel

　　Installation of aluminum honeycomb panelAdopting honeycomb sandwich structure, aluminum honeycomb panel is composed of positive and back aluminum alloy plate and middle aluminum honeycomb paste composite; aluminum honeycomb panel installation of each sheet around the edge, forming a closed box structure, improve the safety and service life of aluminum honeycomb panel.

The surface of the plate product is very smooth. After the surface is coated, it is smooth, durable, and has strong anti-pollution ability. The joint width of the plate can also be strictly controlled. There is no standard size for aluminum honeycomb panel. All plates are customized by the factory according to the design drawings, making the aluminum honeycomb panel more flexible in shaping processing.

　　aluminum honeycomb panelComposite molding is to bond the surface aluminum, aluminum honeycomb, and bottom aluminum together through adhesives to form a sandwich structure. It has the advantages of high strength, good rigidity, light weight, good surface flatness, and sound insulation. The characteristics of the light source honeycomb panel.

　　arc honeycomb panelThe normal temperature composite technology is used. The normal temperature composite technology is to modulate the two-component adhesive according to the proportion, and then use the scraper to scrape the prepared two-component adhesive evenly to the surface and the composite surface of the bottom aluminum, and then add the honeycomb core after scraping.

　　按面铝+铝蜂窝芯+底铝的形式放置于模具上，再在上面覆一层膜，膜的四周用胶带进行密封，最后通过抽真空对Honeycomb Panel进行加压，等到6h过后由于胶粘剂的反应固化把面铝+铝蜂窝芯+底铝牢牢地粘合在一起形成Honeycomb Panel。

　　Stone Honeycomb PanelThe installation is suitable for civil buildings, vehicle and ship decoration, etc. It is the application of aviation and aerospace materials in the field of civil construction.

Aluminum honeycomb panel is a kind of aluminum building materials, mainly used for civil construction, vehicle and ship decoration.

　　stainless steel honeycomb plateIt adopts hot pressing molding technology. Due to the high thermal conductivity value between the aluminum skin and the honeycomb, the thermal expansion and cold contraction of the inner and outer aluminum skin are synchronized; the honeycomb aluminum skin has small holes so that the gas in the plate can flow freely; the slidable installation buckle system will not cause structural deformation during thermal expansion and cold contraction.

Recommended:What are the performance of aluminum honeycomb panel