Installation Method of Stone Aluminum Honeycomb Panel Ceiling

　　Stone Aluminum Honeycomb Panel CeilingIt has the characteristics of light weight, low radiation pollution, saving stone materials, and large board size. It can be used for ceiling, curtain wall, interior wall, ground, etc., and is more and more widely used in decoration and decoration of buildings, vehicles, ships, etc.

Compared with aluminum veneer, the maximum plate surface of box-type honeycomb aluminum plate can be 1500mm × 4500mm, because the plate itself is made of composite material, and the internal aluminum honeycomb provides guarantee for the plate itself to bear its own weight, so that the plate itself does not need to add any reinforcing ribs.

　　Honeycomb aluminum plateIt is a composite material with large surface formed by hot pressing of high-grade aluminum alloy panel, back plate and aluminum honeycomb core material. The product specifications are various, and the surface can be embossed, mirror, embossed, wire drawing, electroplating, anodizing, matte, bright light and metallic color, etc., which can meet the application requirements of various places.

The stone aluminum honeycomb ceiling is a composite plate, which has the advantages of light weight, high strength, good flatness, large surface, easy installation, easy maintenance, good environmental protection, reusable, and excellent thermal expansion and contraction resistance.

Because the marble composite board is cut into 3 or 4 pieces with 1m2 of the original board (full-body board) and becomes 3m2 or 4m2. The 3, 4m2 pattern and color is almost 100% the same, so it is easier to ensure the consistency of the color and pattern when used in large areas.

　　arc honeycomb panelFeatures: sound insulation, heat insulation, fire prevention, shockproof function outstanding.

Stone aluminum honeycomb panel ceiling measurement and setting out is the most precise process in the ceiling project, which plays an important role in controlling the flatness of the ceiling. The measurement and setting-out shall comply with the overall measurement and control procedure before the local measurement and control procedure. According to the original structural axis, the horizontal control line of the suspended ceiling keel shall be set out by theodolite. According to the data required by the standard and based on the elliptical curve of the suspended ceiling, the arching control line of the suspended ceiling keel shall be set out.

　　stainless steel honeycomb plateEasy and fast installation.

The elevation of the suspended ceiling is controlled by the hoop node plate, so the length of the node plate at the center point of the steel beam is longer than that at both ends (the lowest point) of the steel beam, so as to meet the need of the suspended ceiling arching.

Recommended:Applicable scope of honeycomb core wood grain aluminum plate