Maintenance method of composite floor buckle

　　Buckle lock of composite floorAnd solid wood is not recommended to lock, or flat buckle is better. Because the deformation rate of solid wood composite and solid wood is relatively high, it is easy to expand or contract, and if the force is greater, it may directly break the lock. When installing the flat buckle floor, reserve sufficient shrinkage joints on the wall and install springs in the shrinkage joints.

　　aluminum corrugated boardIs the use of aluminum after rolling cold bending into a variety of waveform plate, it is suitable for industrial and civil buildings, warehouses and interior and exterior wall decoration, with light weight, high strength, fire prevention, long life and other characteristics, has been widely applied.

The buckle lock of composite floor is a patented technology of Shandong Dingyuxuan floor. The buckle type is tightly combined, which overcomes the problems of seam separation, warping and bulging caused by the changes of external cold, heat, dry and wet. In the paving process, it is completely nail-free, glue-free and keel-free, and is directly laid on the ground, saving the height of the room, and can be repeatedly disassembled and used, which is economical and practical, than conventional floor per square to save the cost of paving about 20 yuan.

Snap-on floor: the snap-on floor has a serial plate-shaped notch design, and the plates are tightly buckled and seamless, which completely solves the problem of cracking of the floor due to high strength but stepping, and makes the reinforced floor complete the transformation from household type to commercial type.

　　Stone Honeycomb PanelScope of application: all kinds of large public building channels, airports, exhibition halls, shopping centers, stations, Tunnel corridors, etc.

The buckle lock of the composite floor can be directly assembled because it is not necessary to use glue. The environmental problems caused by the glue residue have become a thing of the past. After paving, the floor becomes very clean and tidy without peculiar smell. According to the needs of users, this floor can be used for 5 times.

Lock the floor can be free of glue pavement. Ordinary dry-mouth wood floors need to be connected with adhesive in the paving process, but the adhesive contains chemical components such as formaldehyde, which is easy to cause indoor pollution if used more, and is afraid of weak connection if used less.

　　Mirror honeycomb panelThe appearance is straight, the color is diverse, the color is uniform and stable.

The composite floor is locked and locked due to the locking force, even if it is free of glue, the joints of the floor are very tight, and there will be no cracking, uplift and other problems due to the temperature changes in the four seasons.

Recommended:What are the standards for corrugated aluminum