What are the standards for corrugated aluminum

　　Standard for Corrugated Aluminum PlateIt is one of the commonly used Products in construction, and there is a trend to replace stainless steel and iron plates. First of all, because the density of aluminum is only 2.71 and the density of iron is 7.8, the weight of each square aluminum tile is less than 1/3 of that of stainless steel, which can reduce the cost of the enterprise and reduce the pressure of the bracket.

　　aluminum corrugated boardIs the use of aluminum after rolling cold bending into a variety of waveform plate, it is suitable for industrial and civil buildings, warehouses and interior and exterior wall decoration, with light weight, high strength, fire prevention, long life and other characteristics, has been widely applied.

Now there have been many plastic extrusion corrugated board, corrugated aluminum, corrugated aluminum, there are transparent, there are opaque and colored, as well as multi-layer composite hollow. Corrugated aluminum standard because of its good plasticity, it can better adapt to the requirements of a variety of architectural modeling, but compared to the service life, beauty and durability and other properties of color steel corrugated board better.

Dimensional regulations

The 4.1 uses the length, width and height of the inner dimensions of the carton to indicate the specifications of the carton, and gives the dimensions in the following order and code, and the unit is mm.

A. length (L): the long side dimension of the bottom area in the box;

B. width (B): the size of the short side of the bottom area in the box;

c. Height (H): the dimension of the top surface to the bottom surface in the box;

　　stainless steel honeycomb plateEasy and fast installation.

4.2 According to the weight and size of the contents, the following outer dimensions of the bottom area specified in the GB4892-85 Hard Straight Body Transportation Slack Size Series are preferred: 400 × 600;400 × 300;400 × 200;400 × 150;300 × 200;300 × 133;300 × 100;200 × 150;200 × 133.

Corrugated aluminum standard can also choose other sizes according to the characteristics of the packaged goods.

It is recommended that the ratio of length and width of the 4.3 box should not be greater than 2.5:1; the ratio of height and width should not be greater than 2:1 and not less than 0.15:1.

　　Mirror honeycomb panelThe appearance is straight, the color is diverse, the color is uniform and stable.

The structure of the carton has a protective effect on some commodities, such as some cotton clothes with expanded volume, which will be compressed after being pressed for a period of time. If the carton is packed with flat carton, the corrugated aluminum plate standard means that the folding covers on both sides of the carton will inevitably fail to close together, exposing the commodities in the carton.

It is more appropriate to use a carton with a spit, and the number of spit can be determined according to the specific situation. The appearance of the large-cover carton is neat, and the protection performance of the contents is better than the first two, but the raw material consumption is also more, and the production process is slightly more complicated.

Recommended:Installation Skills of Aluminum Honeycomb Panel Furniture