Complaint hotline for free consultation
13074271912

Kaimai Information News

China's earliest production and processing of aluminum veneer ceiling, one of the curtain wall manufacturers

Type of surface material used for honeycomb aluminum sheet metal wall

Article Source: Guangzhou Kaimai Metal Building Materials Co., Ltd. 人气:-Published: 2016-02-24 15:45:00

Honeycomb aluminum plate金属幕墙所使用的面材主要有以下几种:铝复合板、单层铝板、aluminum honeycomb panel、夹芯保温铝板、不锈钢板、彩涂钢板、珐琅钢板等。

Honeycomb aluminum plate复合板是由内外两层均为0.5mmMiddle clamping of thick aluminum plate2-5mmThick polyethylene or rigid polyethylene foam board, the board surface is coated with fluorocarbon resin coating, forming a tough, stable film, adhesion and durability is very strong, rich in color, the back of the board is coated with polyester paint to prevent possible corrosion. Aluminum composite panels are commonly used panel materials in the early appearance of metal curtain walls.

Honeycomb aluminum plate单层铝板采用2.5mm3mmThick aluminum alloy plate, the surface of the single-layer aluminum plate for the outer curtain wall is consistent with the front coating material of the aluminum composite plate, and the film toughness, stability, adhesion and durability are completely consistent. Single-layer aluminum plate is another common panel material for metal curtain wall after aluminum composite plate, and it is used more and more.

Honeycomb aluminum plate是两块铝板中间加蜂窝芯材粘接成的一种复合材料,根据幕墙的使用功能和耐久年限的要求可分别选用厚度为10mm12mm15mm20mm25mmof honeycomb aluminum plates, with a thickness10mmThe honeycomb aluminum plate shall be made1mmof the front aluminum plate and0.5-0.8mmThe thick back aluminum alloy plate and aluminum honeycomb are bonded with a thickness10mmFor the above honeycomb aluminum plates, the thickness of the aluminum alloy plates on the front and back sides shall be1mmThe honeycomb aluminum plate for curtain wall should be aluminum honeycomb. The shape of honeycomb is right hexagonal, flat hexagonal, rectangular, square, cross, flat square, etc. The honeycomb core material should be specially treated, otherwise its strength is low and its service life is short. If chemical oxygen is applied to aluminum foil, its strength and corrosion resistance will increase. Honeycomb core material in addition to aluminum foil and glass fiber reinforced plastic honeycomb and paper honeycomb, but the actual use of not much. Due to the high cost of honeycomb aluminum plate, the amount is not large.

Recommended article:

Mechanical Properties of Aluminum Honeycomb Panel

/Article/lvfengwobandelixuexi_1.html

Testing standard of honeycomb aluminum plate

/Article/fengwolvbandejianceb_1.html

Manufacturing Technology of Honeycomb Aluminum Plate

/Article/fengwolvbandezhizaoj_1.html

 


Keyword of this article:Honeycomb aluminum plate