Introduction and Performance Comparison of Aluminum Honeycomb Panel

aluminum honeycomb panel幕墙所用的面材有以下4species,(1)aluminum composite plate(2)Single-layer aluminum plate(3)Honeycomb aluminum plate(4)Sandwich insulation aluminum plate, the current use of the larger is the first three, since there are a variety of surface materials to choose from, they have differences before.

Structural type of aluminum honeycomb panel curtain wall and its advantages and disadvantages

1.Aluminum honeycomb panel curtain wall can be divided into unit aluminum panel curtain wall and component aluminum panel curtain wall according to the structural form of curtain wall. The so-called unit curtain wall refers to the framed curtain wall in which panels, beams and columns are assembled into curtain wall units in the factory and installed and constructed on site in the form of curtain wall units. The so-called component type curtain wall is a framed curtain wall with columns, beams and panels installed in turn on site.

Attention should be paid to the application of aluminum curtain wall

1.Deformation resistance of curtain wall system

It is necessary to carry out scientific mechanical calculation for each important part of the curtain wall system, consider the influence of wind pressure, self-weight, earthquake and temperature on the curtain wall system, and carefully check the embedded parts, connecting system, keel system, panel and fasteners to ensure the safety of the curtain wall.

2.Whether floating connection is adopted for aluminum honeycomb panel

The floating connection ensures the recovery ability of the curtain wall after deformation, ensures the integrity of the curtain wall, does not cause the curtain wall to deform due to the force, and avoids the occurrence of bulging or depression on the surface of the curtain wall.

3.The way the plates are fixed

The fixing method of the plate plays a decisive role in the installation flatness of the plate. The inconsistent stress of each fixing point of the plate will cause the deformation of the surface material to affect the exterior decoration effect, so the fixing method of the plate must adopt the fixed distance pressing method to ensure the flatness of the curtain wall surface.

4.Whether there are reinforcement measures at edge removal of composite surface material

Because the folding edge of the composite panel material only retains the thickness of the front plate, the thickness becomes thinner and the strength is reduced, so the edge removal must have reliable reinforcement measures.

Recommended article:

Requirements for installation and vertical openings of aluminum honeycomb panel partition walls

/Article/lvfengwobangeqiangde_1.html

Quality Effect of Aluminum Honeycomb Panel

/Article/lvfengwobandepinzhix_1.html

Development history of honeycomb aluminum plate

/Article/fengwolvbandefazhans_1.html