Manufacturing Technology of Honeycomb Aluminum Plate

Honeycomb aluminum plate制造技术源自航空业，作为幕墙系统的装饰面板不仅经久耐用、板面超大，而且具有极好的平整度。建筑幕墙装饰用Honeycomb aluminum plate一般选用15mm、20mm、25mmThick, in the product size, shape, color and other aspects to provide customized plate, honeycomb aluminum plate has the advantages of excellent material selection, advanced technology and reasonable structure, not only in the large scale, flatness has excellent performance, but also in the shape, surface treatment, color, installation system and other aspects have many choices.

The installation of honeycomb aluminum plate involves many types of work, the process is complex, the construction is difficult, and quality problems are more likely to occur. Usually manifested in the following aspects:

1.Honeycomb aluminum plate has uneven surface and uneven joints.

Cause

(1) The connecting code is not firmly fixed, resulting in offset.

(2) The code piece is not installed straight.

(3) Honeycomb aluminum plate surface itself is uneven.

Prevention and control measures: to ensure the fixing of the connecting piece, the through line should be positioned when the code piece is fixed, and the quality of the honeycomb aluminum plate should be strictly checked before the plate is placed, and the product number provided by the supplier should be checked.

2.Sealant cracking, resulting in gas penetration or rain leakage.

Cause:

(1) The injection part is not clean.

(2) The glue seam depth is too large, resulting in three-sided bonding.

(3) The glue is contaminated or damaged by dust before it is completely bonded.

(4) The flatness error of keel and accessories is too large, and the gap between plates is not correctly reserved.

Prevention and control measures:

(1) Adequate cleaning of gaps between plates(Especially the bonding surface)and dried.

(2) Filling PVC foaming material in deep glue joint(small round bar), so that the glue to form a two-sided bond, to ensure the depth of the joint.

(3) Check whether the bottom groove of the cover plate is installed correctly, and adjust the distance between the honeycomb aluminum plates on both sides of the cover strip.

(4) Careful curing after injection until its safe hardening.

Recommended article:

Requirements for installation and vertical openings of aluminum honeycomb panel partition walls

/Article/lvfengwobangeqiangde_1.html

Quality Effect of Aluminum Honeycomb Panel

/Article/lvfengwobandepinzhix_1.html

Application Value of Aluminum Honeycomb Panel

/Article/lvfengwobandeyingyon_1.html