One of the earliest manufacturers in China to produce and process aluminum honeycomb panels and honeycomb aluminum panels
China's earliest production and processing of aluminum veneer ceiling, one of the curtain wall manufacturers
The weight of the honeycomb sandwich panel with the same stiffness of the arc-shaped aluminum honeycomb panel is only 1/5 of the aluminum plate and 1/10 of the steel plate. The total thickness is 15mm, the panel is 1.0mm, and the bottom plate is 0.8mm aluminum honeycomb panel, which weighs only 6kg/m2.
Read more
The structure of aluminum alloy corrugated board is generally three layers, with 0.4-0.8 thick aluminum layers on both sides of the outside. The corrugated core material in the middle is 0.2-0.4 and bonded with thermosetting epoxy resin adhesive. The product quality is greatly affected by the stability of glue and the temperature in the workshop during production and processing.
Read more
Good thermal insulation effect. No water absorption, resistance to freeze and thaw, low thermal conductivity. 110mm thick CCP composite board is equivalent to 50mm XPS extruded board; equivalent to 200mm thick cement polystyrene board; equivalent to 140mm thick hydrophobic perlite board; equivalent to 350mm thick aerated concrete block thermal insulation effect.
Read more
Stone aluminum honeycomb panel has the characteristics of light weight, low radiation pollution, saving stone material, large plate size, etc., can be used for ceiling, curtain wall, interior wall, ground, etc., more and more widely used in buildings, vehicles, ships and other decoration.
Read more
Hook up corrugated board using alloy aluminum plate as the panel, aluminum corrugated core as the core material, according to the application environment of the plate and material requirements to choose the back plate (not composite back plate), the use of composite aluminum plate production technology to manufacture an aluminum composite plate. It has the characteristics of more than wide board surface, good flatness and small size of falling deviation.
Read more
Aluminum honeycomb panel is based on aluminum metal as the substrate plate, with ordinary aluminum veneer antibacterial, anti-corrosion, long service life characteristics, because of its special design it sound insulation, seismic, moisture-proof effect is also very prominent.
Read more
Sweep and pay attention to Kaimai's official WeChat
Email: 3457334962@qq.com
Address: Jianmei Building, Dali Town, Nanhai District, Foshan City, Guangdong Province, China
Kaimai Metal Building Materials Aluminum Industry is a company specializing inaluminum honeycomb panelProduction and processing of aluminum honeycomb panel manufacturers, aluminum honeycomb panel, also knownHoneycomb aluminum plate