China's earliest production and processing of aluminum veneer ceiling, one of the curtain wall manufacturers
Light steel keel (38 or 50 keel) shall be hoisted according to appropriate spacing, generally with a spacing of 1-1.2 m, and the distance between suspenders shall be distributed according to the provisions of light steel keel.
Read moreAs we all know, aluminum veneer needs to be stored for a period of time after leaving the factory. During this period, workers should be careful. If it is not stored properly, it may cause the processed aluminum veneer to change color or deform, causing serious losses.
Read moreThe history of aluminum corrugated board curtain wall has a long history, but what are the key points before its production and installation? However, it has not been known that aluminum corrugated board curtain wall is mostly used for building exterior decoration and exterior wall enclosure, that is, the internal or external installation of the wall of the building itself is called the curtain wall, and the aluminum corrugated board plays an outer protective role in addition to the decorative role of the building.
Read moreAluminum veneer is divided into two types from the specifications: aluminum veneer with a thickness of less than 1.2mm is called aluminum gusset plate (also called aluminum square plate), and aluminum veneer with a thickness of more than 1.5mm is called aluminum veneer.
Read moreAluminum alloy corrugated board size length 0.1-2.0mm width 800-1220mm. Aluminum corrugated board, also known as corrugated aluminum plate, aluminum plate, aluminum tile, etc., is the use of aluminum plate after rolling cold bending into a variety of wave-shaped plate.
Read moreI believe that people who really have connotation will not pay too much attention to appearance, but care more about the quality of the product. Aluminum veneer manufacturers must pay special attention to the control of product quality in the development process.
Read more