Installation method of aluminum veneer curtain wall

Aluminum veneer manufacturers will briefly introduce the installation method of aluminum veneer curtain wall production for everyone. Interested friends will take a look at it together. I hope it will be helpful to you!

1. Install and close the corners according to the same level.

2, according to the appropriate spacing lifting light steel keel (38 or 50 keel), the general spacing of 1-1.2 meters, boom distance according to the provisions of the distribution of light steel keel.

3. The hanging parts pre-installed on the aluminum veneer keel, together with the aluminum veneer keel, are tightly attached to the light steel keel and buckled under the light steel keel in a vertical direction. The spacing of the aluminum veneer keel is determined according to the plate type size, and must be adjusted to horizontal after all installation.

4. Buckle the aluminum veneer on the keel in sequence. After each piece is buckled, press down the inverted locking piece and connect the keel with the connecting piece.

5. Gloves must be worn when installing the board surface. If fingerprints or stains are accidentally left, detergent can be used to clean and wipe dry.