Daily aluminum veneer installation skills

aluminum honeycomb panel是指经过铬化等处理后，再采用氟碳喷涂技术，加工形成的建筑装饰材料。下面介绍Daily aluminum veneer installation skills：11. Install and close the corners according to the same level.

2Aluminum honeycomb panel, different requirements have different skeleton, such:L50*50*5mmAngle steel fixed, embedded parts aluminum pendant fixed, according to different Products have different fixing methods.

3The lifting parts pre-installed on the keel of the gusset plate, together with the keel of the gusset plate, are tightly attached to the light steel keel in a vertical direction under the light steel keel. The spacing of the keel of the gusset plate is determined according to the size of the plate type, and must be adjusted to the horizontal level after all the installation.

42. Buckle the gusset plate on the keel in sequence, press down the inverted locking plate after each piece is buckled, and connect the keel with the connecting piece when connecting.

5When installing the board surface, you must wear gloves. If you accidentally leave fingerprints or stains, you can use detergent to clean and wipe dry.

Recommended article:

What is wood grain aluminum veneer

/Article/shimeshimuwenlvdanba_1.html

Definition of aluminum honeycomb panel

/Article/lvfengwobandedingyi_1.html

Aluminum veneer dry hanging construction scheme

/Article/lvdanbanganguashigon_1.html