Aluminum honeycomb panel with honeycomb structure as sandwich panel

aluminum honeycomb panelHoneycomb sandwich panels with honeycomb structure as the core layer are inspired by natural hexagonal honeycombs. Aluminum honeycomb panels made of aluminum alloy because of its unique structure not only in the same volume of other materials in the lightest quality, and stiffness and overall stability are very good, but also has sound insulation and heat insulation performance. Aluminum alloy is not radioactive, will not volatilize any harmful gases harmful to human health, but also can be completely recycled and reused, saving resources and energy, the pollution to the environment to a minimum level, which makes aluminum honeycomb panels become a new material for energy saving, environmental protection and health.

Honeycomb Panel的芯层是典型的多孔结构，连续的多边形孔格呈规则的周期性排列，因而Honeycomb Panel实体部分截面积很小，所以它的密度相对其他夹层材料也很小。由于Honeycomb Panel密度远小于层合板、钢板等普通板材，在体积相同时其质量也是最轻的。aluminum honeycomb panel的质量仅为同体积玻璃钢层合板的9%, same volume steel plate11%, the same volume of aluminum alloy plate23%. This allows aluminum honeycomb panels to save a lot of energy in lightweight applications. The low density and light weight make the honeycomb panel well meet the requirements of aerospace engineering vehicles, trains, high-speed trains, automobiles and ships and other transportation tools for materials.“Lightweight, energy saving and environmental protection”requirements.

(1)Aerospace: Because of the above advantages, aluminum honeycomb panels are widely used in aviation, aerospace, transportation, construction, military and other fields, for the manufacture of rocket fairings, aircraft wings and cargo warehouses, train bulkheads and floors, car skins and doors, building ceilings and curtain walls. The wing, vertical tail, etc., cockpit or cargo compartment floor, door partition, etc. made of honeycomb panels effectively reduce the weight of the aircraft and improve the control sensitivity of the moving parts.

(2)Trains, high-speed trains: bulkheads, control panels, luggage racks, ceiling pads, washing rooms, toilet units, floors, exit doors and four corner doors and other vehicle interior panels can be made of honeycomb panels. In addition, a honeycomb plate material may be used for external components such as a front end, a roof, a fender, and a vehicle body. In addition, the energy absorption and shock absorption characteristics of the honeycomb structure can be used as a protective device, such as installing the honeycomb panel on the front of a high-speed train to protect the personal safety of the conductor in the event of an accident.

Recommended article:

Honeycomb aluminum plate problem solution

/Article/fengwolvbanwentijiej_1.html

Advantages of aluminum honeycomb panel system

/Article/lvfengwobanxitongyou_1.html

Aluminum honeycomb panel installation construction

/Article/lvfengwobananzhuangs_1.html