Aluminum honeycomb panels can be applied in what aspects

　　aluminum honeycomb panelIn the elevator engineering application, due to its fire prevention, heat preservation, sound insulation, shockproof, strong bearing, buffer resistance, light weight and other advantages, it is the most ideal material for public elevators and cargo elevators, which greatly reduces the load of the elevator.

The application of aluminum honeycomb panels in curtain wall decoration engineering applications due to the size and shape of the plate customized in the factory, so it has a strong flexibility (such as arc plate, folded plate, etc.), can be installed on almost all keel, simple, fast, is the construction industry preferred lightweight materials.

The advantages of aluminum honeycomb panel partition performance

(1) Fire prevention: aluminum plate is non-combustible material.

(2) Corrosion resistance: The surface of the aluminum honeycomb panel is treated with epoxy fluorocarbon, which has strong corrosion resistance. Salt spray for 48 hours without pinhole, crack, no bubble.

(3) Environmental protection: Honeycomb panels are pure aluminum Products, do not volatilize any harmful gases, non-radioactive and can be completely recycled, 100% environmentally friendly Products.

(4)arc honeycomb panelEasy to dismantle and assemble, and will not damage the plate. Due to its light weight and convenient transportation, it can be transported to different places for repeated use. This is the other partition plate can not be compared.

Common Installation Method of Aluminum Honeycomb Panel Curtain Wall

1. Lug type

This installation method is to separate the lifting lug and the honeycomb panel. After the lifting lug is processed separately, it is connected to the glue seam position of the honeycomb panel. The suitable width of the glue seam is ≥ 12mm. This installation method makes the processing simple and the installation convenient.

2. Flip type

This installation method is to process the flanging for installation when processing the aluminum honeycomb panel. The installation only needs to comfort the connection with the keel and glue seam. The suitable glue seam width is ≥ 10mm. This method is convenient to install, but the processing is slightly complicated and is not suitable for modeling curtain wall panels.

3. Buckle type

This node is aluminum buckle strip type, and the buckle strip is a specific profile,Stone Honeycomb PanelThe installation is simple, but this method requires high processing accuracy of the plate, and it is not recommended to use the plate with a length greater than 3000mm. According to the width of the buckle strip, the plate is sewn with 20mm and 40mm, etc.

Recommended:Knowledge about aluminum honeycomb panel