Complaint hotline for free consultation
13074271912

Kaimai Information News

China's earliest production and processing of aluminum veneer ceiling, one of the curtain wall manufacturers

Requirements for installation and vertical openings of aluminum honeycomb panel partition walls

Article Source: Guangzhou Kaimai Metal Building Materials Co., Ltd. 人气:-Published time: 2016-02-18 11:35:00

aluminum honeycomb panelThe installation sequence of the wall shall start from one end of the wall. Walls with doorways should first be installed from the doorway to both sides. Both sides of the doorway should be full board. Take the operation method with the installation of the wall with the vertical opening.

随立口的方法是同时使用粘结与木螺丝拧固,门口与墙体结合比较坚牢。而后塞口效果较差。故在aluminum honeycomb panel墙中不应采用后塞口。龙骨墙的墙位需放线方正准确,但与梁柱交接的墙要按照梁柱形状切割,务使接触面吻合。“The keel wall of the glyph arrangement should adopt the positioning frame. When the keel is misplaced, it is advisable to set the keel at both ends first, hang it straight and then pull the wire, and then set the middle keel to align with the wire. The pile layer shall be pasted with the first board, which shall be hung vertically. When pasting backward, the inspection ruler shall be used to lean up and down horizontally to level with the adjacent board. Apply adhesive to the second ply and break a small section on the left and right sides.100 MillimetersAs a running air hole, so that the board surface adjustment smoothly.

aluminum honeycomb panel的粘结剂,若采用聚乙烯醇胶和混合石膏者,应适当控制凝固时间。尤其龙骨墙粘贴面层板和安装aluminum honeycomb panel时,凝固速度应使有足够时间调整板面平整,要防止只注意操作速度而影响板面观感的现象,粘结剂不宜使用过多过厚。aluminum honeycomb panel接缝厚度不大于5 mm, veneer bonding thicknessMm is appropriate.

aluminum honeycomb panel是一项新材料、新工艺,目前由于技术指导力量薄弱,施工之前没有仔细研究讨论,产品到了现场才发现aluminum honeycomb panel长短不合适,临时裁改,既费工又费料。我们认为aluminum honeycomb panel要推广使用尚有一些问题亟待研究解决: Need to study better means of transport(Similar containers, can prevent rain, adopt mechanical loading and unloading, improve loading, overcome poor stacking conditions on site, reduce round-trip transportation, and reduce material loss. Before the construction of the unit project, a technical guidance group shall be established to study the construction process and formulate effective management measures. Managers and workers should learn the properties of materials, know the construction technology and storage methods.

Recommended article:

Quality Effect of Aluminum Honeycomb Panel

/Article/lvfengwobandepinzhix_1.html

Application Value of Aluminum Honeycomb Panel

/Article/lvfengwobandeyingyon_1.html

Use and characteristics of aluminum honeycomb press

/Article/lvfengwobandeshiyong_1.html

 


Keyword of this article:Requirements for installation and vertical openings of aluminum honeycomb panel partition walls