Introduction of aluminum honeycomb panel

aluminum honeycomb panel做隔断的优势性能

aluminum honeycomb panelThe surface is made of aluminum alloy plate treated by fluorocarbon rolling, and the middle is aluminum honeycomb in line with American aviation standards. The special composite process of cold pressing and hot pressing technology is adopted, which makes the aluminum honeycomb panel have the advantages of light weight, sound insulation, heat insulation, fire prevention, environmental protection, non fragile, strong rigidity and non deformation. The plate structure of two layers of aluminum plates with high strength and light aluminum honeycomb core material in the middle of the high flatness plate surface forms the ideal plate with extremely high flatness and extremely small deformation.

大板面由于重量轻且复合结构板材强度高，使该板材最大宽度达1500mm, and can still maintain the flatness of the board. If the longest board length is matched6000mmThe number of plates required to make the ceiling can be minimized. Smooth plate aluminum plate smooth surface treatment, good plate flatness and minimum seam spacing make the entire ceiling area present a very wide and smooth appearance. Thin and narrow seams:

(1)Fireproof: aluminum plate is non-combustible material.

(2)Corrosion resistance: aluminum honeycomb panel is treated with epoxy fluorocarbon on the surface, which has strong corrosion resistance. Salt spray spray48No pinhole, crack and blistering for hours.

(3)Environmental protection: Honeycomb panels are pure aluminum Products, do not volatilize any harmful gases, non-radioactive and can be completely recycled, 100% environmentally friendly Products.

(4)Aluminum honeycomb panel is easy to dismantle and assemble, and will not break the plate. Due to its light weight and convenient transportation, it can be transported to different places for repeated use. This is the other partition plate can not be compared.

Common Installation Method of Aluminum Honeycomb Panel Curtain Wall

1.Lifting lug type: this installation method is to separate the lifting lug and the honeycomb panel. after the lifting lug is separately processed, it is connected to the glue seam position of the honeycomb panel. the suitable width of the glue seam is≥12mm, This installation method makes processing simple and easy to install.

2.Flip type: this installation method is to process the flanging for installation when processing the aluminum honeycomb panel. the installation only needs to comfort the connection with keel and glue seam, and the suitable glue seam width is≥10mm, This method is easy to install, but the processing is slightly complicated, and it is not suitable for modeling curtain wall panels.

3.Buckle strip type: this node is aluminum buckle strip type, buckle strip is a specific profile, easy to install, but this method requires high machining accuracy of the plate, it is not recommended to use the length is greater3000mmThe above plate. According to the width of the buckle strip, there is a seam in the plate.20mm和40mmWait.

Recommended article:

Development of aluminum honeycomb panel industry in China

/Article/lvfengwobanxingyezai_1.html

Introduction of aluminum honeycomb panel

/Article/lvfengwobandejieshao_1.html

Discussion on Aluminum Honeycomb Panel

/Article/qiantanlvfengwoban_1.html