The emergence of partitions of aluminum honeycomb panels

　　aluminum honeycomb panelUse

(1) External wall hanging board of building curtain wall

(2) Interior decoration works

(3) Billboards

(4) Buildings on board

(5) Aviation Manufacturing

(6) Indoor partition and commodity display

(7) Commercial transport vehicle and container vehicle body

(8) Buses, trains, subways and rail transit vehicles

(9) For the modern furniture industry, which has strict environmental protection requirements, using aluminum honeycomb panels to make furniture processing materials is a good material choice in the new century. Its completely non-toxic green quality allows furniture manufacturers to process furniture. When, there are fewer unnecessary environmental protection procedures; in addition,arc honeycomb panelPanels can be diversified such as solid wood, aluminum, gypsum board, natural marble stone, can be made into honeycomb panels, material selection is convenient.

(10) aluminum honeycomb panel partition: the emergence of aluminum honeycomb panel partition, breaking the traditional partition mode, with its noble, fresh and stylish style, won the market share of medium and high-end office space.

Aluminum Honeycomb Core

Aluminum honeycomb core material is made of aluminum foil and special honeycomb node adhesive on the aluminum honeycomb core production line. The factors that affect the performance of honeycomb core mainly include aluminum foil, node adhesive and honeycomb core specifications and other parameters.

　　Stone Honeycomb PanelThere are small holes on the skin, so that the gas in the plate can flow freely; the slidable installation buckle system will not cause structural deformation during thermal expansion and contraction, so it can ensure extremely high flatness.

Adopt adhesive: two-component polyurethane high-temperature curing adhesive, with full-automatic honeycomb board composite production equipment through pressurized high-temperature composite, to overcome the brittleness of the previous honeycomb board adhesive layer. The inner layer is a special hexagonal aluminum honeycomb, composed of aluminum alloy with a hardness of H19, which acts as a core plate adhered in the sandwich structure and bears pressure in the tangential direction.

These mutually restrained dense honeycombs are like many small I-beams, which can be dispersed to bear the pressure from the direction of the panel, so that the plate is evenly stressed and ensures that the panel can still maintain a high flatness in a large area.

Recommended:What is the thickness of aluminum honeycomb panel