Use range of sound insulation aluminum honeycomb panel

　　Sound insulation aluminum honeycomb panelSuitable for civil construction, vehicle and ship decoration, etc. It is the application of aviation and aerospace materials in the field of civil construction. The whole processing process is completed in a modern factory. Hot pressing molding technology is adopted. Due to the high thermal conductivity value between the aluminum skin and the honeycomb, the thermal expansion and cold contraction of the inner and outer aluminum skin are synchronized. There are small holes in the honeycomb aluminum skin, so that the gas in the plate can flow freely.

　　aluminum corrugated boardIs the use of aluminum after rolling cold bending into a variety of waveform plate, it is suitable for industrial and civil buildings, warehouses and interior and exterior wall decoration, with light weight, high strength, fire prevention, long life and other characteristics, has been widely applied.

The inner layer is a special hexagonal aluminum honeycomb, composed of aluminum alloy with a hardness of H19, which acts as a core plate adhered in the sandwich structure and bears pressure in the tangential direction. These mutually restrained dense honeycombs are like many small I-beams, which can be dispersed to bear the pressure from the direction of the panel, so that the plate is evenly stressed and ensures that the panel can still maintain a high flatness in a large area.

　　Stone Honeycomb PanelScope of application: all kinds of large public building channels, airports, exhibition halls, shopping centers, stations, Tunnel corridors, etc.

The weight of the honeycomb plate with the same rigidity of the sound insulation aluminum honeycomb plate is only 1/5 of that of the aluminum single plate and 1/10 of that of the steel plate. The interconnected aluminum honeycomb cores are like countless I-beams. The core layers are distributed and fixed in the whole plate surface to make the plate more stable. Its wind pressure resistance is much higher than that of the aluminum single plate and the aluminum single plate. It is not easy to deform and has good flatness, even if the partition size. It can also achieve extremely high flatness and is the preferred lightweight material for the construction industry.

The structure of the honeycomb panel is relatively complex. When the sound propagates to the honeycomb panel wall, the sound insulation aluminum honeycomb panel will vibrate back and forth in each small honeycomb, which is equivalent to increasing the multi-layer sound insulation board, which will cause a large sound energy loss. At the same time, for the sound wave of a specific frequency, it will cause the diffraction phenomenon of the sound wave, so that the energy of the sound wave is dispersed, and a good noise reduction effect is achieved.

　　arc honeycomb panelFeatures: sound insulation, heat insulation, fire prevention, shockproof function outstanding.

Aluminum honeycomb panels are suitable for interior decoration, vehicle decoration (buses, trains, subways and ships, etc.), outdoor billboards, commodity display stands, etc., and are the application of aviation and aerospace materials in the field of civil construction.

Recommended:Application scope of pinhole honeycomb aluminum sound absorption board