Development direction of composite honeycomb aluminum plate manufacturers

　　Composite honeycomb aluminum plate manufacturersThe core is divided into many closed chambers, which prevents the air flow, hinders the sound wave, improves the sound absorption coefficient (can reach more than 0.9), and improves the strength of the plate itself, so that the size of the single plate can be larger, Further increasing the design freedom. According to the indoor acoustic design, different perforation rate design can be carried out, and the sound absorption coefficient of the combined structure can be controlled within a certain range, which not only achieves the design effect, but also can reasonably control the cost.

　　aluminum corrugated boardIs the use of aluminum after rolling cold bending into a variety of waveform plate, it is suitable for industrial and civil buildings, warehouses and interior and exterior wall decoration, with light weight, high strength, fire prevention, long life and other characteristics, has been widely applied.

Composite honeycomb aluminum plate factory installation method:

1. Lug type

This installation method is to separate the lifting lug and the honeycomb panel. After the lifting lug is processed separately, it is connected to the glue seam position of the honeycomb panel. The suitable width of the glue seam is ≥ 12mm. This installation method makes the processing simple and the installation convenient.

2. Flip type

This installation method is to process the flanging for installation when processing the aluminum honeycomb panel. The installation only needs to comfort the connection with the keel and glue seam. The suitable glue seam width is ≥ 10mm. This method is convenient to install, but the processing is slightly complicated and is not suitable for modeling curtain wall panels.

　　Stone Honeycomb PanelScope of application: all kinds of large public building channels, airports, exhibition halls, shopping centers, stations, Tunnel corridors, etc.

3. Buckle type

This node is aluminum buckle strip type, buckle strip is a specific profile, easy to install, but this method requires high machining accuracy of the plate, it is not recommended to use the length of more than 3000mm plate. According to the width of the buckle strip, the plate is sewn with 20mm and 40mm, etc.

As an important lightweight material, the composite honeycomb aluminum plate manufacturer is widely used in the aviation manufacturing industry, and it has also been used in foreign railway vehicles. Its use is quite extensive, such as the French plate TGV series and the Italian ETR series high-speed trains.

　　Mirror honeycomb panelThe appearance is straight, the color is diverse, the color is uniform and stable.

At the end of the 20th century, due to the high requirements for lightweight vehicles in the development of EMUs, aluminum honeycomb was first used to build partitions, flat roof panels and door panels on domestic EMU prototypes, and good results were achieved.

Recommended:Development trend of aluminum corrugated board manufacturers