Characteristics of honeycomb aluminum plates

　　Characteristics of honeycomb aluminum plate:Room temperature curing process room temperature curing process usually uses two-component polyurethane adhesive or two-component epoxy structural adhesive, the mixed adhesive can be cured at a temperature higher than 10 degrees C, heating can speed up the curing speed.

First of all, the aluminum panel is made into a box shape, arc shape, and then spray glue or glue, and then the honeycomb core and aluminum panel in order to stack, apply a certain pressure, at room temperature after 1 weeks of curing, or in a hot press heating to not higher than 100 ℃, after a few hours to cure.

NaturalStone Honeycomb PanelThe ultimate state bending stress when cracks or fractures occur in the bending tensile state of the stone panel is taken as the bending strength value of the whole plate, and the bending stress when the whole plate is bent and yielded is not taken as the bending strength value.

Because when the stone cracks or fractures, the plate can still be in normal working condition and has not completely lost its basic function, but due to the existence of the stone cracks, rain or moisture can directly penetrate into the adhesive of the adhesive layer, thus accelerating the aging process of the adhesive and reducing the durability of the plate, the bending stress when the stone plate cracks or fractures should be taken as the bending strength of the stone honeycomb plate.

　　Honeycomb aluminum plateFeatures: Aluminum back plate

The honeycomb aluminum plate back plate shall be made of the same material as the panel. The appearance shall be punished by anodic oxidation. A wall exposed in the atmosphere shall be coated with a cover coating. The coating materials can be polyester, epoxy, acrylic and other materials to prevent the aluminum plate from being exposed in the atmosphere for a long time and causing corrosion.

Characteristics of Honeycomb Aluminum Sheet: Aluminum Honeycomb Core

Aluminum honeycomb core material is made of aluminum foil and special honeycomb node adhesive on the aluminum honeycomb core production line. The important factors affecting the performance of honeycomb core include aluminum foil, node adhesive and honeycomb core specifications and other parameters.

　　arc honeycomb panelThe characteristics of: aluminum foil

Aluminum foil should be selected 3003 grades, processing process should be held harsh appearance disposal punishment, in dealing with high strength or long-term requirements of the product, should be careful with the acceptance of 1100 pure aluminum foil processing manufacturing honeycomb core material.

Recommended:What are the uses of aluminum honeycomb panels