Structure and use of honeycomb aluminum plate

Honeycomb aluminum plateIt is a honeycomb sandwich panel with honeycomb structure as the core layer, which is inspired by natural hexagonal honeycomb. The honeycomb aluminum plate made of aluminum alloy not only has the lightest quality among other materials of the same volume due to its unique structure, but also has good rigidity and overall stability, and also has sound insulation and heat insulation performance. Aluminum alloy is not radioactive, will not volatilize any harmful gases harmful to human health, but also can be completely recycled and reused, saving resources and energy, the pollution to the environment to a minimum level, which makes the honeycomb aluminum plate become a new material of energy saving, environmental protection and health.

Honeycomb aluminum plateThe wallboard system is based on the composite honeycomb panel technology developed by the aviation industry. Such advanced technology enables the company to manufacture wallboard Products with good strength and light weight. These wallboard Products have a very flat surface and the width of the joints can be strictly controlled, which allows the architect to design a very flat and beautiful wall with a large surface. Except for specific restrictions, there is no standard size for honeycomb aluminum panels, and all wall panels are customized by the factory according to the design drawings.

Honeycomb aluminum plateSuch a production method makes the board has a strong flexibility in terms of size and shape, such as: arc-shaped plate and folding plate. This flexibility is widely used in practical applications, because these plates can be installed on almost all keels, and the installation is extremely simple. The honeycomb aluminum plate system becomes a complete multi-functional highly competitive wall panel system. It offers these extremely practical solutions for almost all types of wall design.

Honeycomb aluminum plateThe basic requirement of the design is too small, too low, resulting in ultimate failure after deflection.

Instability of the panel between holes (wrinkling): The panel is too thin and the honeycomb is large. This phenomenon may cause damage to the development of honeycomb holes in the panel. This results in wrinkling of the panel.

Panel crack: the thickness of the whole plate is not enough, the thickness of the panel is not enough, and the strength of the panel is not enough.

Core shear failure: insufficient core shear strength. The thickness of the whole plate is not enough.

Core deflection collapse: insufficient core plane. It\'s too big.

Core local pressure loss: core compression strength is too small.

Panel and core separation: panel and core strength is not enough.

Recommended article:

Brief Description of Failure Mode of Aluminum Honeycomb Panel Sandwich Structure

/Article/jianshulvfengwobanji_1.html

Bonding Technology of Aluminum Honeycomb Panel

/Article/lvfengwobandezhanjie_1.html

Past and Present Life of Aluminum Honeycomb Panel

/Article/lvfengwobandeqianshi_1.html