Introduction of aluminum honeycomb panel

aluminum honeycomb panel采用复合蜂窝结构，选用优质的3003H24合金铝板或5052AH14高锰合金铝板为基材，与铝合金蜂窝芯材热压复合成型。aluminum honeycomb panel从面板材质、形状、接缝、安装系统到颜色、Surface treatment为建筑师提供丰富的选择，能够展示丰富的屋面表现效果，具有卓越的设计自由度。它是具有施工便捷、综合性能理想、保温效果显著的新型材料，它的卓越性能吸引了人们的眼球。

aluminum honeycomb panelThere is no standard size, all plates are customized by the factory according to the design drawings, widely used in building exterior wall decoration (especially suitable for high-rise buildings) interior wall ceiling, wall partition, door and insulation compartment, billboard and other fields. This product will inject green, environmental protection and energy saving fresh power into China\'s building materials market.

aluminum honeycomb panelThe structural structure of perforated sound-absorbing ceiling board is perforated aluminum alloy panel and perforated back plate, which are directly bonded to aluminum honeycomb core by high-quality adhesive to form aluminum honeycomb sandwich structure, and a layer of sound-absorbing cloth is pasted between honeycomb core, panel and back plate. Because the honeycomb core in the honeycomb aluminum plate is divided into many closed cells, the air flow is prevented, the sound wave is hindered, the sound absorption coefficient is improved (more than 0.9), and the strength of the plate itself is improved, so that the size of the single plate can be larger, and the design freedom is further increased.

aluminum honeycomb panelAccording to the indoor acoustic design, different perforation rate design can be carried out, and the sound absorption coefficient of the combined structure can be controlled within a certain range, which not only achieves the design effect, but also can reasonably control the cost. By controlling the perforation aperture and hole spacing, the perforation rate can be changed according to the customer\'s use requirements. the maximum perforation rate is less than 30%. the aperture is generally selected from #2.0, #2.5, #3.0 and other specifications. the perforation requirements for the back plate are the same as those for the panel. the sound-absorbing cloth is made of high-quality non-woven fabric and other sound-absorbing materials. It is suitable for sound-absorbing wall panels and ceiling panels of large public buildings such as subways, theaters, radio stations, television stations, textile mills, factories with super-standard sound and gymnasiums.

Recommended article:

Structure and use of honeycomb aluminum plate

http://m.klccly.com/Article/fengwolvbandegouzaoh_1.html

Development Trend of Aluminum Honeycomb Panel

http://m.klccly.com/Article/lvfengwobandefazhanq_1.html

Processing conditions of honeycomb aluminum plate

http://m.klccly.com/Article/fengwolvbandejiagong_1.html