Research and Development of New Hanging Technology for Aluminum Honeycomb Panel

For single-surface modeling of the interioraluminum honeycomb panel幕墙装饰，如何解决过去传统的铝板加工、铝板安装的弊端，扬长避短呢?At present, the more popular and fashionable decorative hanging process is to use molds to form aluminum honeycomb panels, with inner and outer arcs perpendicular to the installation surface, tight seam splicing installation, unilateral locking of corner codes, and insertion of dislocation on the other side. The installation method can achieve straight, smooth, beautiful and generous lines, and realize the effect of real circular arc-shaped aluminum plate shaping wall, which is much more beautiful than the assembly effect of small flat glass folding lines.

It is a new product that replaces the traditional practice of the past. Aluminum honeycomb panel This system uses a plurality of single-curved circular arc aluminum plates formed by mold processing, and then welded and installed, which increases the smooth and beautiful lines compared with small flat plate fold line assembly. It also reduces the stress concentration during material installation and keeps the finished product installed without deformation. At the same time, the angle code is staggered and inserted into the lock buckle, which can solve the effect of tight seam assembly. The research and development of this system has obvious advantages in the market competition, and the market prospect is broad, popular and beautiful.

本套系统根据设计图纸、共享圆弧的周长、SThe inflection point, etc., reasonably divide the aluminum honeycomb panel into blocks, determine the center point when the two pieces of material are spliced, and then position, install and fix the stressed steel skeleton square tube. Then the aluminum plate angle code is accurately positioned at the center of the assembly, the horizontal height is adjusted, in place and locked firmly.

Aluminum honeycomb panel is processed by mold for arc stretching, roll bending, lamination and compound forming. The panel folding is welded to install angle codes. The bottom surface is relatively reduced and the force point acts on the outer aluminum plate. The main facade is processed into a single-sided curved surface according to the design arc, and then the remaining hemming surface is processed into a design arc and welded into a unit aluminum plate by aluminum. Finally, it is continuously bolted and dry-hung, installed and formed, achieving a beautiful and generous effect.

解释：[Aluminum honeycomb panel is made of aluminum panel and bottom plate, plus two-component glue, the center is aluminum hexagonal honeycomb, vacuum composite. Aluminum honeycomb panel has a small density, greatly reducing the building load and cost, because the middle interlayer contains a lot of air, can be sound insulation, heat insulation, no combustible substances, fire rating reachedA2Grade, waterproof, moisture-proof, no harmful gas release, high specific strength per unit mass, high specific stiffness,It is not easy to deform, has extremely high flatness, and has good seismic performance, which completely overcomes the deformation and middle collapse of other decorative panels when the area of a single piece is large. And the processing and application is convenient, can be arbitrarily cut and folded, the surface can be used in a variety of colors, including fluorocarbon coating can ensure long product life, and has the advantages of pressure resistance, large bearing load, light weight and recyclable. It is obvious that the superior force is better than the single-layer aluminum plate.]

Recommended article:

aluminum microporous sound-absorbing honeycomb panel

/Article/lvzhiweikongxishengf_1.html

Standard Description of Stone Honeycomb Panel

/Article/shicaifengwobanbiaoz_1.html

Application of aluminum honeycomb panel foundation

/Article/lvfengwobanjichuyong_1.html