Processing and installation of hyperboloid honeycomb aluminum plate

hyperboloidHoneycomb aluminum plate的加工与安装，先在工厂与现场进行试验，在取得可靠数据及参数的基础上，在实现精细化测量的基础上，进行下单加工，保证铝檩条定位质量。

(1) Measuring and setting out: according to the three-dimensional coordinates provided by the design, set out the coordinates of the panel on the aluminum purlin, and set out the position of the plate seam on the aluminum purlin.

(2) Cutting and processing: honeycomb panels are processed and produced by professional manufacturers and inspected and accepted by the project department.

(3) Transportation and hoisting of honeycomb panels:Transport the honeycomb panel to the corresponding lifting position by means of transportation such as trolley;At the position of the inner ring gutter, erect the hoisting pulley, pull it to the roof by manpower, and transport it to the designated position of installation.;Both ends of the hoisted honeycomb panel shall be tied with a lockwire rope.

(4) Positioning and Installation of Honeycomb Panel:Install the honeycomb panel on the purlin and align the seam according to the setting-out position.;The installation can be installed by auxiliary tools such as ladders and ropes.;The dust and dirt should be wiped clean before installation, and the protective film of the plate seam is strictly prohibited to be opened at this time to protect the honeycomb aluminum plate surface.

计分格图把该位置的Honeycomb aluminum plate(Honeycomb aluminum panels are marked)Hang on the profile hook and adjust it“three degrees”During the installation process, do a good job in product protection and prevent rework caused by scratches and other reasons.

Honeycomb aluminum plate周围用于加劲肋连接在一起的角码与框架梁铆接。同一平台的符合Honeycomb aluminum plate平整度要控制在3 mmWithin, the width error of the caulking is also controlled.2 mmWithin.

During the construction, protective measures shall be taken for the components and panels of the curtain wall, and the adhesion on the surface shall be removed in time after the sealant is cured and reaches the required strength.

Recommended article:

Characteristic Expression of Aluminum Honeycomb Panel

/Article/lvfengwobantexingbia_1.html

Core layer of aluminum honeycomb panel

/Article/lvfengwobandexinceng_1.html

Aluminum alloy panel and back plate of aluminum honeycomb panel

/Article/lvfengwobanlvhejinmi_1.html