Curtain wall stone aluminum honeycomb panel

Why more and more customers choose to use stonealuminum honeycomb panelDo curtain wall In the past, the requirements for wall surfaces were usually made of stone. Stone was very popular at first, but with the progress of society, it is difficult to meet the needs of consumers with single stone. Why do more and more customers choose to add an additional layer of aluminum honeycomb panel now? The reason is that stone aluminum honeycomb panel has the effect of moisture prevention, fire prevention and heat insulation, and another reason is for large public places. For the exterior wall, the stone will be thicker. Generally, the thickness of the stone is 20mm. However, the thicker the stone, the heavier the stone, and its bearing capacity will be greatly reduced. The stone aluminum honeycomb panel will solve the problem that these stones are too heavy. If the thickness is 20mm, the stone only needs 5mm, and then it will be laminated on the 15mm aluminum honeycomb panel, this comparison shows that 20mm thick stone is much heavier than 20mm stone aluminum honeycomb panel, and its shelf life is as long as that of stone. Even if it is not removed, the aluminum honeycomb panel inside can still be recycled 100%, which is why more and more customers choose to use stone aluminum honeycomb panel as curtain wall.

Common Installation Method of Aluminum Honeycomb Panel Curtain Wall

1. Lifting lug type: This installation method is to separate the lifting lug and the honeycomb plate. After the lifting lug is processed separately, it is connected to the glue seam position of the honeycomb plate. The suitable width of the glue seam is ≥ 12mm. This installation method makes the processing simple and the installation convenient.

2. flanging type: this installation method is to process the flanging for installation when processing the aluminum honeycomb panel. the installation only needs to comfort the connection with keel and glue seam. the suitable glue seam width is ≥ 10mm. this method is convenient to install, but the processing is slightly complicated and is not suitable for modeling curtain wall panels.

3. Buckle type: This node is aluminum buckle type, buckle is a specific profile, easy to install, but this method requires high machining accuracy of plates, and it is not recommended to use plates with a length greater than 3000mm. According to the width of the buckle strip, the plate is sewn with 20mm and 40mm, etc.