Electrostatic spraying process of aluminum veneer curtain wall

     幕墙Aluminum veneerOne of the methods of surface treatment is electrostatic spraying. Spraying is divided into powder spraying and liquid spraying. The combined Boya spraying materials are mainly: fluorocarbon spraying, powder spraying, polyester spraying and other materials are mixed with high color retention pigments, fluorocarbon spraying, collision resistance and abrasion resistance. Under 50kg of collision, the aluminum veneer is free of deformation, the spraying layer is free of cracks, the falling layer is intact, and it is resistant to dilute acid and mortar. The spray powder produced by many domestic manufacturers has a very different weight. Some powder contains gold chips. In the future, when it is hung on the wall surface, it will change during the day and in the evening with the change of the sunlight viewpoint. The color depth of the wall surface is different. The selection of powder spray paint will lead to attention. Liquid spray coating is fluorocarbon polymer spray coating, commonly known as fluorocarbon spray coating, is used to make paint fluorocarbon polymer resin, as a metal finish, and the contact with fluorine is the most stable molecular contact.

Because aluminum veneer is easier to bend and form messy shapes, it can be used to changing the needs of endless exterior wall decoration. It is usually considered that single-layer aluminum veneer is the best material for aluminum veneer curtain wall. Can get a variety of colors of spray appearance, good strength, low cost, long life, aluminum veneer hanging on the wall, 50 years will not fall and corrosion, (before liberation in Tianjin with aluminum veneer for the roof is still intact). The life span can be longer to match the life span of the building.

After electrostatic spraying curtain wall aluminum veneer, its surface will form a layer of coating, the coating can not only increase the color of the curtain wall aluminum veneer surface, more effectively isolate the outside of the curtain wall aluminum veneer main material pollution, therefore, combined with Boya curtain wall aluminum veneer electrostatic spraying process can greatly increase the service life of the curtain wall aluminum veneer.