China's earliest production and processing of aluminum veneer ceiling, one of the curtain wall manufacturers
一、Aluminum honeycomb panel for exterior wallThere are several installed
1. Lug type
This installation method is the lifting lug and honeycomb panel separate type, the lifting lug is separately processed and connectedaluminum honeycomb panelThe appropriate width of the glue seam is ≥ 12mm,double curved plateThis installation method makes the processing simple, easy to install.
2. Flip type
This installation method is to process the flanging for installation when processing the aluminum honeycomb panel. The installation only needs to comfort the connection with the keel and glue seam. The suitable glue seam width is ≥ 10mm. This method is convenient to install. The aluminum honeycomb panel is made of external wall, but the processing is slightly complicated, and is not suitable for modeling curtain wall panels.
3. Buckle type
This aluminum honeycomb panel installation contact for aluminum buckle strip type, buckle strip for specific profiles, simple installation, but this method on the plate processing accuracy requirements are higher, not recommended for the length of more than 3000mm plate. According to the width of the buckle strip, the aluminum honeycomb panel is made of 20mm and 40mm in the middle of the panel.
Second, what are the advantages?
1. Green, environmental protection and energy saving curtain wall materials
Aluminum honeycomb curtain wall panel is all aluminum structure, aluminum honeycomb panel to do exterior wall is green, environmental protection, energy saving new building materials, known as the 21st century the best curtain wall building materials.
2. Light weight, high strength, high stiffness, stable structure, good wind pressure resistance
Aluminum honeycomb curtain wall panels with its light weight, high strength, stiffness and many other advantages, aluminum honeycomb panels as exterior wall has been widely used in building interior and exterior wall decoration.
4. The aluminum honeycomb curtain wall panel consists of a honeycomb sandwich panel with the same rigidity, which weighs only 1/5 of the aluminum plate and 1/10 of the steel plate. The honeycomb cores connected to each other inside the aluminum honeycomb curtain wall panel are like countless I-beams.
5. It is distributed and fixed in the whole aluminum honeycomb curtain wall plate surface. Aluminum honeycomb curtain wall plate is not easy to produce shear. Aluminum honeycomb curtain wall plate is made of outer wall to make the plate more stable. The wind resistance of aluminum honeycomb curtain wall plate can greatly surpass that of aluminum-plastic plate and aluminum veneer, and has the characteristics of not easy deformation and good flatness. Even if the aluminum honeycomb curtain wall plate is large in size, it can achieve extremely high flatness.
6. Fire prevention: aluminum plate is non-combustible material.
7. Corrosion resistance: aluminum honeycomb panels are treated with epoxy fluorocarbon on the surface, and aluminum honeycomb panels have strong corrosion resistance for exterior walls. Salt spray for 48 hours without pinhole, crack, no bubble.
8. Environmental protection: Honeycomb panels are pure aluminum Products, do not volatilize any harmful gases, no radioactivity and can be completely recycled, 100% environmentally friendly Products.
9. Aluminum honeycomb panel is easy to dismantle and assemble, and will not break the plate. Aluminum honeycomb panels do exterior wall because of its light weight, convenient transportation solid can be transported to different places for repeated use. This is the other partition plate can not be compared.
Third, aluminum honeycomb panel should pay attention
1. Fully clean the gap between the aluminum honeycomb panels to ensure that the bonding surface is clean and dry.
2. In order to adjust the depth of the seam, avoid three sides with glue, the seam is filled with polyvinyl chloride foaming material (small round bar).
3. After the glue injection, the surface of the glue seam should be leveled to remove the excess glue.
4. Aluminum honeycomb panels do exterior wall maintenance after glue injection, glue before not completely hardened, do not be contaminated with dust and scratches.
Recommended:Processing of aluminum honeycomb panel Manufacturing Technology of Aluminum Honeycomb Panel