What are the thickness specifications of aluminum honeycomb panels?

aluminum honeycomb panelManufacturing technology originated from the aviation industry. The product selection of the company\'s unified standard pre-roller coated high-grade aluminum alloy coil, combined with a variety of production processes refined. As an external curtain wall system, it is not only durable, large panel, but also has excellent flatness. Aluminum honeycomb panel can be bent, good processing performance, surface treatment has a variety of options. In addition, in addition to the aluminum alloy, the panel can also choose other materials according to customer needs, such as copper, zinc, stainless steel, etc.

aluminum honeycomb panel的总厚度一般在5——200mmIn the interval, the thickness of aluminum honeycomb panel for building curtain wall should not be less10mm, the nominal thickness of the panel shall not be less1.0mm,The nominal thickness of the back plate shall not be less0.7mm。

aluminum honeycomb panel矩形板尺寸一般不超过1500*4000mm. Special requirements may be determined2000*10000mmThe large board surface aluminum honeycomb panel. The application of aluminum honeycomb panel is very extensive, initially used in the aviation manufacturing industry, now in the building decoration industry with more, such as building curtain wall, indoor wall and ceiling, roof, canopy, partition and so on. In addition, it can also be applied to rail transit vehicle interior, ship interior, printing platen, elevator decoration engineering, waiting booth, display stand, electronic whiteboard, etc.

Adhesive aluminum honeycomb panel due to light weight, high strength, high rigidity, good stability, heat insulation and sound insulation, in aircraft, trains, ships, construction and other fields has a wide range of application prospects. However, its strength, service life and allowable working environment are greatly affected by the properties of the adhesive. Therefore, a new manufacturing method is needed to completely change its existing shortcomings, and the brazing method is the most ideal method to replace the adhesive method. The joints formed by the brazing method can form metallurgical bonds, and its mechanical properties are much higher than that of adhesive materials.

本文在钎料复合轧制技术的基础上，对钎焊aluminum honeycomb panel的制造方法及力学性能进行研究，研究工作及结果主要包括： (1)The forming method of honeycomb core and the brazing technology of brazing aluminum honeycomb plate were studied, and it was found that the honeycomb core was rolled.

Recommended article:

Research and Development of New Hanging Technology for Aluminum Honeycomb Panel

/Article/xinxinglvfengwobangu_1.html

Effect of Adhesive on Aluminum Honeycomb Panel

/Article/jiaozhanjiduilvfengw_1.html

What are the advantages of using aluminum honeycomb panels?

/Article/shiyonglvfengwobandu_1.html