Aluminum honeycomb panel uses and characteristics

一、aluminum honeycomb panelThe surface is made of aluminum alloy plate treated by fluorocarbon rolling, and the middle is aluminum honeycomb in line with American aviation standards. The special composite process of cold pressing and hot pressing technology is adopted, which makes the aluminum honeycomb panel have the advantages of light weight, sound insulation, heat insulation, fire prevention, environmental protection, non fragile, strong rigidity and non deformation.

The plate structure of two layers of aluminum plates with high strength and light aluminum honeycomb core material in the middle of the high flatness plate surface forms the ideal plate with extremely high flatness and extremely small deformation. Due to the light weight and high strength of the composite structure plate, the maximum width of the plate is 1500mm, while the flatness of the plate can still be maintained.

If the number of plates required to make the ceiling can be minimized with the longest board length of 6000mm. Smooth plate aluminum plate smooth surface treatment, good plate flatness and minimum seam spacing make the entire ceiling area present a very wide and smooth appearance. Thin and narrow seams This innovative sheet system can achieve a minimum seam width of 3mm, making the indoor ceiling fresh and bright.

2. are widely used in curtain wall decoration, interior decoration, roofing materials, elevator decoration, subway, high-speed rail, luxury car and ship interiors, partitions, etc.

3. conventional thickness: 10mm, 12mm, 15mm, 20mm, 25mm

4. surface coating: fluorocarbon coating, polyester coating, color optional.