Aluminum honeycomb panel is also called honeycomb composite aluminum plate

　　Aluminum honeycomb panel is also called honeycomb composite aluminum plateAluminum honeycomb curtain end plate or honeycomb structure aluminum curtain wall plate. It is only in recent years used in high-rise building exterior wall of high-grade decorative materials, in fact, honeycomb composite aluminum plate has long been used in the aircraft, is now moved to the building application, mainly for building exterior walls.

Honeycomb composite aluminum plate is composed of two aluminum plates with a thickness of 0.8-1.2mm and 1.2-1.8mm and a honeycomb-shaped interlayer sandwiched with different materials. The middle honeycomb has corrugated strip, regular hexagon, flat hexagon, rectangle, cross, double curvature, etc. Aluminum honeycomb panel is also called honeycomb composite aluminum plate

Honeycomb sandwich material production requirements are very strict, such as the use of pure aluminum foil sandwich, without special treatment when its strength is low, short life, and the aluminum foil for a variety of chromium sulfuric acid treatment after chemical oxidation, strength and corrosion resistance, although enhanced, but the cost is higher; paper core honeycomb afraid of water leakage, afraid of moisture, low strength. The materials commonly used for sandwich honeycomb are aluminum foil, glass fiber reinforced plastic, mixed fiber and paper. Their prices also vary. Aluminum honeycomb panel is also called honeycomb composite aluminum plate

This honeycomb composite aluminum plate, the sum of the thickness of the inner and outer two layers of aluminum plate is more than 2-3mm, which is the same as the thickness of the single-layer aluminum plate, so it has high strength, good sound insulation and heat insulation performance, and does not need to add rock wool. The disadvantage is that the composite plate is too thick. The cost is higher, compared with other aluminum plates.aluminum honeycomb panel

Its price is about 50% to more than double, and its weight is large, and it is difficult to process and form; when the composite board is installed, if the seal around is not good, it is easy to cause water leakage. And the flatness of the board is poor, based on the above situation. The application of this kind of plate in construction engineering is far less than that of aluminum-plastic plate and single-layer aluminum plate. Aluminum honeycomb panel is also called honeycomb composite aluminum plate

Product structure performance characteristics:

1. Super flat and strong compression resistance;double curved plate

2. Light weight, good safety, high strength, good rigidity;

3. Sound insulation, heat insulation and shockproof;

4. Tailor-made special-shaped processing can be processed into triangle, trapezoid, S arc, folded plate and other special-shaped processing in the factory; aluminum honeycomb plate is also called honeycomb composite aluminum plate

5. No color difference, fire retardant, anti-deformation, long durability;Stone Honeycomb Panel

6. Easy to perfectly cooperate with lamps, sprinkler heads, air conditioners and other equipment;

7. Easy to install and maintain.

Recommended:Application fields of special-shaped aluminum veneer Brief introduction of special-shaped aluminum veneer