Installation skills of aluminum honeycomb panel ceiling

aluminum honeycomb panel的安装技巧，当设计无要求时，宜采用抽芯铝铆钉，中间必须垫橡胶圈。抽芯铆钉间距以控制在100-150mmInside.

(一)Line: fixed skeleton, the position of the skeleton to the base. The skeleton is fixed on the main structure, and the quality of the main structure shall be checked before setting out.

(二)The connecting piece of the fixed frame: the connecting piece is welded on the column of the main structure to fix the frame.

(三)Fixed skeleton: the skeleton shall be treated with anti-corrosion treatment in advance. The installation framework shall be in accurate position and firmly combined. Check center line, surface elevation, etc. after installation. In order to ensure the installation accuracy of the plate, it is advisable to use theodolite to penetrate the mullion rod of the beam. Deformation joints, settlement joints, variable cross-section, etc. shall be properly treated to meet the use requirements.

(四)Installation of aluminum honeycomb ceiling: aluminum ceiling installation fixed to be firm and reliable, simple and easy.

1The gap between the board and the board should be internally treated to make it flat and smooth.

2After the aluminum plate is installed, cover and protect the parts that are easy to be contaminated with plastic film or other materials.

Recommended article:

aluminum honeycomb panel把握“Three new forces”Open up new markets

/Article/lvfengwobanbawosanxi_1.html

Introduction of aluminum honeycomb panel curtain wall

/Article/lvfengwobanmuqiangde_1.html

Aluminum honeycomb panel with rich effect

/Article/juyoufengfuxiaoguode_1.html