Aluminum honeycomb panel is a kind of composite material developed by high toughness adhesive

　　Installation Scheme of Aluminum Honeycomb Panel Ceiling: Aluminum honeycomb panel is a kind of composite material developed by high toughness adhesive, It has the characteristics of light weight, high impact resistance, high rigidity, high flatness, surface color selection and flexible design. It can be applied to the decoration of building curtain wall, building roof, indoor space wall and ceiling, ship interior, furniture industry, electronic whiteboard backboard, etc. Do you know how the aluminum honeycomb ceiling is installed? The following small series to tidy up a program:

1. construction process

Aluminum honeycomb ceiling construction process is as follows:

Erection of construction platform (finished electric hanging blue) → measurement, setting out and fixed point → installation of connecting piece and boom angle steel → installation of main keel → installation of secondary keel → installation of honeycomb board matching keel → installation of honeycomb board → cleaning → removal of construction platform

2. construction methods and key points

1. Erection of construction platform.

2. Measurement, setting out and positioning.

3. Install connecting piece and angle steel of boom

　　aluminum honeycomb panelThe connecting piece adopts L110 × 150 × 7 galvanized angle steel with a length of 200mm, which is processed and blanking in the factory and connected with the high-strength bolt under the purlin support plate.

4. Installation of main keel

The main keel is C160 × 70 × 2.5C steel, the length is the same as the distance between the net ball, and the main keel and the hanger rod angle steel are connected by M12 × 50 bolts.

The connection between the main keels is connected with M12x25 through the built-in connection.

5. Install secondary keel

The secondary keel is C140 × 70 × 20 × 2.5C steel, with a total length arrangement and a spacing of 1500mm. The secondary keel is connected with M12 × 25 through built-in connectors, and the secondary keel is connected with the main keel through M12 × 50 bolts.

In order to prevent the instability of the upper flange of the C- shaped steel of the secondary keel, two tie rods are added between each secondary keel.

6. Install matching keel of honeycomb plate

Honeycomb plate matching keel consists of angle steel suspender (L50 × 5) and honeycomb plate matching keel (L40 × 4). The spacing of angle steel suspender is 1000. M12 × 50 bolts are used to connect with secondary keel. Honeycomb plate matching keel is connected with angle steel suspender bolt. The levelness of keel is adjusted through waist-shaped hole, and the levelness control is not more than 4mm.

7. Install aluminum honeycomb panel

Each ceiling board is an installation unit.

Aluminum honeycomb panel has good performance and obvious advantages. The specific bending rigidity is large, the specific bending strength is high, that is, the light weight and high strength; the flatness is very good. In the past five years, the output of aluminum honeycomb composite materials in China has maintained an average growth rate of 22%. In recent years, domestic enterprises have continuously innovated in technology. The first 2000mm ultra-wide specification aluminum honeycomb composite panel production line in China has been started, showing a good development trend.