What is the qualification standard for aluminum honeycomb panel inspection?

In the process of processing and production of each product, minor defects or bumps are inevitable, so there must be a standard to weigh whether a product is qualified,aluminum honeycomb panelNo exception, today we will talk about it What is the standard to measure whether the aluminum honeycomb panel is qualified?

The whole processing process of aluminum honeycomb panel is composed of hot pressing, which itself has the characteristics of high wind pressure resistance, shock absorption and sound insulation, flame retardant and heat preservation. This kind of aluminum honeycomb panel with excellent performance also has certain requirements in appearance inspection.

If the scratches on the surface of the aluminum honeycomb panel are not returned to the factory within the standard range, what is the standard for such scratches? The length of the scratch does not exceed 150mm, the width does not exceed 0.3mm, and the depth does not penetrate the color layer on the surface. At most one scratch per square meter is a qualified product.

In addition, qualified aluminum honeycomb panels also have a requirement, that is, open glue. Open glue refers to the aluminum foil and honeycomb core is not good, found in the warping phenomenon, generally not bonded length can not exceed 5mm, flanging can not exceed 3, which is also in line with the qualified standard.

Recommended article:

What is the qualification standard for aluminum honeycomb panel inspection?

/Article/duilvfengwobanjianya_1.html

Classification of aluminum honeycomb panel

/Article/lvfengwobandefenlei_1.html

What material is aluminum honeycomb panel composed

/Article/lvfengwobanyoushimec_1.html