Aluminum honeycomb panel processing flow

a.Put the irregularaluminum honeycomb panel手画图全部改为AUTOCADDrawing, after confirmation, print three copies and bind them into a book according to batch and drawing number. Technology(Transfer to archive room after completion)One copy, one copy for workshop and one copy for quality assurance inspection.

b.Drawings without aluminum honeycomb panel numbering shall be uniformly numbered. Further numbering of numbered figure numbers: suffix+ARepresentative Panel;Suffix+BRepresentative baseplate;Suffix+COn behalf of aluminum honeycomb core;And so on.

c.For the aluminum plate or other material surface and bottom plate that needs sheet metal processing, the bending coefficient should be carefully measured and documented.

d.Write a catalog, calculate the area and total area of a single piece, and so on.

e.For the plate to be processed by sheet metal, the unfolded drawing of sheet metal shall be drawn according to the bending coefficient and the size shall be indicated. If the inner and outer surfaces are not marked on the drawing, the expanded drawing will be drawn after implementation. In general, the side of the main view on the development view facing the person is the inner surface.(Usually uncoated surface)Other circumstances should be specially noted. Print three copies and bind them into a book according to batch and drawing number. Technology(Transfer to archive room after completion)One copy, one copy for workshop and one copy for quality assurance inspection.

f.Prepare sheet metal processing instructions, stating the processing flow, tolerance requirements, precautions, processing points, etc.

g.Prepare sheet metal processing blanking table with large font. The texture direction along the length direction is expressed“↑”;Texture direction along the width direction“→”。

h.For the need for CNC cutting and CNC to carry out the material, to carry out computer programming, and stored.UThe disk and other technical data shall be submitted to the workshop director for signature.

i.Prepare aluminum honeycomb panel processing instructions, stating the processing process, aluminum honeycomb core requirements, adhesive material requirements and construction technology, special-shaped part mold diagram, aluminum honeycomb panel construction technology, how to follow-up processing, etc.

j.Provide accessory drawings, installation drawings and installation requirements.

k.Proofread technical documents prepared by others.

l.Archive finished drawings and technical documents.

m.On-site guidance to solve difficult problems such as aluminum honeycomb panel installation.

n.Answer the problem of aluminum honeycomb panel processing.

Recommended article:

Construction Technology of Honeycomb Aluminum Plate

/Article/fengwolvbandeshigong_1.html

aluminum honeycomb panel行业10强

/Article/lvfengwobanxingye10q_1.html

Material and structure of aluminum honeycomb panel

/Article/lvfengwobandecaizhij_1.html