Construction Technology of Honeycomb Aluminum Plate

(1)Due to the large allowable error of civil construction,Honeycomb aluminum plateThe engineering construction requires high precision, so it cannot completely rely on the civil horizontal datum line, and must be re-measured by the datum axis and leveling point, and corrected for review.

(2)According to the design, the curtain wall positioning line and grid line position are determined at the bottom layer.

(3)Use theodolite or laser verticator to lead the positive and negative corners of the curtain wall, and use the steel wire fixed on the steel bracket as the marking control line.

(4)Use a spirit level and standard steel tape to lead out the elevation line of each layer.

1)Determine the center line of each facade.

2)The measurement error shall be controlled and distributed during the measurement, and the error shall not be accumulated.

3)The measurement line shall be set out when the wind force is not greater4level, and to take shelter measures.

4)After setting out and positioning, the control line shall be checked regularly to ensure the verticality of the honeycomb aluminum curtain wall and the correct position of the metal mullion.

All facade decoration works should be unified to put the baseline, and pay attention to construction coordination.

2Installation of column

将立柱先与连接件连接，然后连接件再与主体预埋件连接，并进行调整和固定。立柱安装标高偏差不应大于3mm, the front and rear deviation of the axis should not be greater2mm, the left and right deviation should not be greater3mm. The installation elevation deviation of two adjacent columns shall not be greater3mmThe maximum elevation deviation of columns on the same floor shall not be greater5mm, the distance deviation of two adjacent columns should not be greater2mm。

Recommended article:

Standard for Honeycomb Aluminum Plates for Building Fining Materials

http://www.klccly.com/Article/jianzhuzhuangshicail_1.html

Selection requirements of raw materials for manufacturing aluminum honeycomb panels

http://www.klccly.com/Article/zhizaolvfengwobansuo_1.html

Aluminum honeycomb panel manual board product advantages

http://www.klccly.com/Article/lvfengwobanshougongb_1.html