Aluminum honeycomb panel structure and installation knowledge:

   Aluminum honeycomb panel constructionThe structure is perforated panel and perforated backboard, which are directly bonded to aluminum honeycomb core by high-quality adhesive to form aluminum honeycomb sandwich structure, and a layer of sound-absorbing cloth is pasted between the honeycomb core and the panel and backboard. Duealuminum honeycomb panel内的蜂窝芯分隔成众多的封闭小室，阻止了空气流动，使声波受到阻碍，提高了吸声系数(可达到0.9以上)，同时提高了aluminum honeycomb panel自身的强度，使单块板材的尺寸可以做到更大，进一步加大了设计自由度。可以根据室内声学设计，进行不同的穿孔率设计，在一定的范围内控制组合结构的吸音系数，既达到设计效果，又能够合理控制造价。通过控制穿孔孔径、孔距，并可根据客户使用要求改变穿孔率，最大穿孔率<30%，孔径一般选用∮2.0、∮2.5、∮3.0等规格，背板穿孔要求与面板相同，吸音布采用优质的无纺布等吸声材料。

With the improvement of people\'s living standards, architectural decoration is to be beautiful and generous, aluminum honeycomb panel as a decorative material aluminum honeycomb panel is easy to dismantle and assemble, and will not break the plate. Due to its light weight and convenient transportation, it can be transported to different places for repeated use. This is the other partition plate can not be compared.