China's earliest production and processing of aluminum veneer ceiling, one of the curtain wall manufacturers
aluminum honeycomb panel表面采用经氟碳滚涂处理的铝合金板材,中间是符合美国航空标准的铝蜂窝,采用专用复合工艺冷压和热压技术,使得aluminum honeycomb panel有质量轻、隔音、隔热、防火、环保、不易碎、刚性强不变形等优点。
High flatness panel
The plate structure of high-strength mild aluminum honeycomb core material is sandwiched between two layers of aluminum plates, forming this ideal plate with extremely high flatness and extremely small deformation.
Large plate surface
由于重量轻且复合结构板材强度高,使该板材最大宽度达1500mm, and can still maintain the flatness of the board. If the longest board length is matched6000mmThe number of plates required to make the ceiling can be minimized.
Smooth board surface
The smooth surface treatment of the aluminum plate, the good flat surface and the minimum joint interval make the whole ceiling area present a very wide and smooth appearance.
thin and narrow seams
这个创新的板材系统可以达到3mmThe minimum seam width makes the indoor ceiling fresh and bright.
Widely used in curtain wall decoration, interior decoration, roofing materials, elevator decoration, subway, high-speed rail, luxury car and ship interiors, partitions, etc.
常规厚度:10mm、12mm、15mm、20mm、25mm
Surface coating: fluorocarbon coating, polyester coating, color optional.
Recommended article:
What are the advantages of honeycomb aluminum plate
/Article/fengwolvbandeyoudian_1.html
Precautions for the use of aluminum honeycomb panels
/Article/shiyonglvfengwobande_1.html
Surface Treatment Process of Honeycomb Aluminum Plate
/Article/fengwolvbanbiaomianc_1.html