Installation Scheme of Aluminum Honeycomb Panel Ceiling System

(一)Construction process

aluminum honeycomb panelCeiling construction process is as follows:

施工平台搭设(Finished electric hanging blue)→Measurement, setting out, fixed point→Install connecting piece and hanger rod angle steel→Installation of main keel→Install secondary keel→Install honeycomb plate matching keel→Installing honeycomb panels→Cleaning→Demolition of construction platform

(二)Construction methods and key points

1Erection of construction platform.

22. Measurement, setting out and positioning.

3Installation of connecting pieces and hanger rod angle steel

aluminum honeycomb panel连接件采用L110×150×7Galvanized angle steel, length200mm,The factory processes the blanking material and connects it with the high-strength bolt under the purlin support plate.

4Installation of main keel

主龙骨为C160×70×2.5Csection steel, the length is the same as the distance between the net ball, and the main keel and the hanger rod angle steel pass throughM12×50bolted connections.

主龙骨间连接通过内置连接件用M12x25Connect.

5Installation of secondary keel

次龙骨为C140×70×20×2.5CSteel section, through-length arrangement, spacing1500mm, the connection between the secondary keels is used through the built-in connector.M12×25Connection, secondary keel and main keel throughM12×50Bolted connection.

为了防止次龙骨CThe upper flange of the section steel is unstable, so two tie rods are added between each secondary keel.

6Installation of honeycomb plate matching keel

Honeycomb Panel配套龙骨由角钢吊杆(L50×5)Matching keel with honeycomb plate(L40×4)Composition, angle steel boom spacing1000,M12×50The bolt is connected with the secondary keel, and the matching keel of the honeycomb plate is connected with the angle steel suspender bolt. The levelness of the keel is adjusted through the waist-shaped hole, and the levelness is controlled not to exceed4mm。

7Installation of aluminum honeycomb panel

Each ceiling board is an installation unit.

Recommended article:

Practical aluminum honeycomb panel

/Article/shiyongdelvfengwoban_1.html

Honeycomb aluminum plate is very popular

/Article/helps-61151628421_1.html

Selection requirements of aluminum honeycomb panel

/Article/lvfengwobandexuanzey_1.html