The role of aluminum honeycomb panel

aluminum honeycomb panel广泛应用于建筑幕墙装饰、天花吊顶、家具Honeycomb Panel材料、隔断系列、电梯工程、轨道交通系列和电子白板系列等项目和工程中。

Building curtain wall exterior wall hanging board: honeycomb aluminum wall panel system to the aviation industry developed from the composite honeycomb panel technology as the basis, so advanced technology to enable the company to create a good strength and light weight of the wall panel Products. These wallboard Products have a very flat surface and the width of the joints can be strictly controlled, which allows the architect to design a very flat and beautiful wall with a large surface.

Ceiling: honeycomb aluminum plate light weight, good toughness, high strength, good sound insulation and heat insulation performance, is the ideal choice of large engineering ceiling plate, and honeycomb aluminum plate installation method diversification, can be heavy ceiling design, can be repaired.

In addition, the structural structure of the perforated sound-absorbing ceiling board of the aluminum honeycomb panel is a perforated aluminum alloy panel and a perforated backplane, which are directly bonded to the aluminum honeycomb core by high-quality adhesive to form an aluminum honeycomb sandwich structure, and a layer of sound-absorbing cloth is pasted between the honeycomb core, the panel and the backplane. Because the honeycomb core in the honeycomb aluminum plate is divided into many closed cells, the air flow is prevented, the sound wave is hindered, the sound absorption coefficient is improved (more than 0.9), and the strength of the plate itself is improved.

The size of a single plate can be made larger, further increasing the design freedom. According to the indoor acoustic design, different perforation rate design can be carried out, and the sound absorption coefficient of the combined structure can be controlled within a certain range, which not only achieves the design effect, but also can reasonably control the cost. By controlling the perforation aperture, hole spacing, and according to customer requirements to change the perforation rate, the maximum perforation rate <30%.

Generally, the aperture is ∮ 2.0, ∮ 2.5, ∮ 3.0 and other specifications. The back plate perforation requirements are the same as those of the panel. The sound-absorbing cloth is made of high-quality non-woven fabric and other sound-absorbing materials. Therefore, it is more suitable for sound-absorbing wall panels and ceiling panels of large public buildings such as subways, theaters, radio stations, television stations, textile factories and super-standard factories and gymnasiums.

Recommended article:

Application Research of Aluminum Honeycomb Panel on Bus Floor

/Article/lvfengwobanzaikeched_1.html

Fabrication of sandwich aluminum honeycomb panel

/Article/jiaxinlvfengwobandez_1.html

Practical aluminum honeycomb panel

/Article/shiyongdelvfengwoban_1.html