Scientific Popularization of Aluminum Honeycomb Panel

You may not understandaluminum honeycomb panelHowever, in daily life, aluminum honeycomb panels are more or less exposed. Aluminum honeycomb panels are widely used and are widely used in house decoration, elevators, rail transit, etc. Aluminum honeycomb panel is so magical, the next small series will take you to a trip to the popularization of aluminum honeycomb panel science tour.

Aluminum honeycomb panel is a typical representative of aerospace cutting-edge materials for civilian use. The intermediate interlayer contains air for heat insulation and sound insulation, and the density is very low, which can effectively reduce costs.

The wind pressure of aluminum honeycomb panel is stronger than that of aluminum veneer, because its internal structure is not easy to shear, so that the whole part is more stable. Experiments have confirmed that the sound insulation, heat insulation, heat preservation, and energy saving effects of aluminum honeycomb panels are very good. In this regard, aluminum veneer is no match. For example, raindrops hit the aluminum veneer, the sound is very loud, if it is aluminum honeycomb panel, the sound is very small.

The process of aluminum honeycomb panel generally adopts continuous roller coating, and the surface painting is completed at one time, which has the advantage of lasting and non-fading. In addition, it is excellent in weather resistance and is particularly suitable as a decoration for an exterior wall of a building.

The straightener of aluminum honeycomb panel shall first check whether the mechanical fasteners, hydraulic transmission system and operating handles and buttons are normal during shift change. Check whether the hydraulic pump and motor are normal.

根据铝单板型材长度，将后夹头的距离适当调整，并固定好后夹头，空负荷试车试行，操作钳口“开-闭”, cart“Stretching-Return”Several times, check whether it is normal, and make sure that the profile temperature is lower50℃Straightening can only be carried out at the same time, the loading operation jaw is loosened, the cart is returned to the limit position, and the rear chuck is in a straightened state when clamped at the same time.

The profile should be straightened in time to prevent the billet from accumulating on the cold bed, causing bruises, scratches and scratches. The decorative surface of the aluminum veneer profile should be upward to avoid scratches on the decorative surface. The conveyor belt conveying the straightened billet and the bridge belt should keep running synchronously.

Recommended article:

Installation of aluminum honeycomb panel frame

/Article/lvfengwobanmuqiangde_1.html

aluminum honeycomb panel performance decision

/Article/lvfengwobandexingnen_1.html

The advantages of aluminum honeycomb panel

/Article/lvfengwobandeyoudian_1.html