Categories of aluminum veneer

　　1、Aluminum veneersmallpox series (aluminum plate with thickness above 1.5mm)

The aluminum veneer adopts high-quality aluminum alloy panel as the base material, and the leading numerical control bending skills ensure that the plate can be flat and not deformed after processing. In the process of the device, the external force resistance is superior, the appearance color is uniform, the ultraviolet radiation resistance, the oxidation resistance and the super corrosion resistance are excellent. The use of aluminum veneer is to build curtain walls, columns and beams, balconies, clapboard decorations, outdoor decoration, advertising signs, vehicles, furniture, exhibition stands, instrument shells, subway shipping things, etc.

Aluminum veneer good performance and decorative effect,Stone Honeycomb PanelIt is not only closely related to the material of aluminum alloy plate, but also closely related to the type of paint sprayed on the surface of aluminum veneer.

Aluminum veneer ceiling information through more than ten years of development, skills are constantly updated, the first generation of goods are gypsum board, mineral wool board; the second generation is PVC; the third generation of goods is metal ceiling. And in the metal ceiling, aluminum veneer came first,double curved plateThe aluminum gusset plates on the current market are also divided into the following levels: the first type of aluminum-magnesium alloy contains some manganese together. The greatest advantage of this material is that it has good oxidation resistance. The strength and rigidity are improved due to the addition of appropriate manganese, which is the best information for suspended ceilings;.

The second type of aluminum manganese alloy, aluminum veneer the sheet strength and stiffness is slightly better than that of aluminum magnesium alloy, but the oxidation resistance can be slightly insufficient; the third type of aluminum alloy, the sheet contains less manganese and magnesium, so its strength and stiffness are significantly lower than that of aluminum magnesium alloy and aluminum manganese alloy, oxidation resistance can be usually.

2. Aluminum veneer ceiling series (aluminum plate with thickness below 1.2mm)

The key to the selection of aluminum veneer is not the thickness, but the material, household plate 0.6MM is OK, because aluminum buckle plate does not have the same span as plastic steel plate, the key to the selection is the elasticity and patience of the plate, followed by the appearance of the disposal.