Basic common sense about honeycomb aluminum plate

Honeycomb aluminum plate用途

(1)External wall hanging board of building curtain wall

(2)Interior decoration works

(3)Billboard

(4)Building on board

(5)aviation manufacturing industry

(6)Indoor partition and commodity display

(7)Commercial transport vehicle and container vehicle body

(8)Bus, train, subway and rail transit vehicles

(9)For the modern furniture industry, which has strict environmental protection requirements, using aluminum honeycomb panels to make furniture processing materials is a good material choice in the new century. Its completely non-toxic green quality allows furniture manufacturers to process furniture. Less unnecessary environmental protection procedures;In addition, the aluminum honeycomb panel can be diversified such as solid wood, aluminum plate, gypsum board, natural marble stone, can be made into honeycomb panels, material selection is convenient.

(10) Aluminum honeycomb panel partition: the emergence of aluminum honeycomb panel partition, breaking the traditional partition mode, with its noble, fresh and stylish style, won the market share of medium and high-end office space.

Advantage Performance

(1)Fireproof: aluminum plate is non-combustible material.

(2)Corrosion resistance: aluminum honeycomb panel is treated with epoxy fluorocarbon on the surface, which has strong corrosion resistance. Salt spray spray48No pinhole, crack and blistering for hours.

(3)Environmental protection: Honeycomb panels are pure aluminum Products, do not volatilize any harmful gases, non-radioactive and can be completely recycled, 100% environmentally friendly Products.

(4)Aluminum honeycomb panel is easy to dismantle and assemble, and will not break the plate. Due to its light weight and convenient transportation, it can be transported to different places for repeated use. This is the other partition plate can not be compared.

Installation Method

1.Lug type

此Installation Method是吊耳和Honeycomb Panel分离式，吊耳单独加工后连接与Honeycomb Panel的胶缝位置，胶缝适宜宽度为≥12mm, This installation method makes processing simple and easy to install.

2.flanging

此安装方式是加工aluminum honeycomb panel时即加工有安装用翻边，安装只需安慰置连接与龙骨及胶缝处即可，适宜胶缝宽度为≥10mm, This method is easy to install, but the processing is slightly complicated, and it is not suitable for modeling curtain wall panels.

3.Buckle

此节点为铝Buckle，扣条为特定型材，安装简单，但此方法对板材加工精度要求较高，不建议使用于长度大于3000mmThe above plate. According to the width of the buckle strip, there is a seam in the plate.20mm和40mmWait.

Recommended article:

Market demand of honeycomb aluminum plate

/Article/fengwolvbandeshichan_1.html

Anodizing and Coloring Process of Aluminum Honeycomb Panel

/Article/lvfengwobanyangjiyan_1.html

Honeycomb aluminum plate material requirements

/Article/fengwolvbancailiaoya_1.html