Operation process of honeycomb aluminum plate production

At present, the application of our countryHoneycomb aluminum plate生产线有多种。从进纸(Raw Materials)To the finished product(Honeycomb cardboard)It is automatically completed by multiple processes. The main equipment involved in the honeycomb paperboard production line are: paper feeding system, glue feeding system, drying system, cutting machine, core pressing block machine, conveyor belt, stretching machine, core coating glue system, core-Surface composite system, surface pressure heating plate making machine, cutting board machine, etc.

Honeycomb aluminum plate production line operation process we need to pay attention to the following:

13. Strictly abide by the company\'s safety management system and operate according to regulations to ensure safe production. Alcohol, shirtless, barefoot, slippers, gloves and children are strictly prohibited.(Female employees are forbidden to wear hair)Post operation.

2Check whether all parts are normal before starting up, and then start the power supply for slow trial operation.2-3Minutes, determine that the equipment has no abnormal phenomenon before running production.

32. The upper and lower base paper tubes shall be checked whether the sandwich core is tightened, so as not to adjust the side distance during patrol inspection to prevent accidental safety accidents such as paper tube landing.

4When checking the spacing and glue amount of the glue roller, pay attention to the operation of each rotating part to avoid hand injury and collision.

5When pushing face paper, core paper and inner paper, pay attention to the upper and lower heating plates, and do not extend your hands too much to prevent the heating plate from burning your hands and the pressing plate from suddenly falling out of control.

6When pushing the cardboard into the forming bed through adhesive forming, do not put your hand into the transmission belt to avoid crushing the hand.

7In the production of connecting plates, attention should be paid to the operation of cross-cutting and pushing-pulling lifting and shrinking belts. Do not cross and climb the handrail net at will. Emergency treatment is an exception, but attention should be paid to safety.

8When power is on and off(The opening should be from large to small, and the closing should be from small to large.)At the same time should be used to the right hand operation(high-power equipment)。

92. When inspecting and eliminating temporary faults at the working end with dense components, sub-file system and accident-prone, more than two people shall monitor the work.

10The goods must be stored in a fixed position to keep the road unblocked.

Recommended article:

What material does the aluminum honeycomb panel decorative panel consist

/Article/lvfengwobanzhuangshi_1.html

Mechanized production of aluminum honeycomb panels

/Article/zhuanyedelvfengwoban_1.html

Mechanized production of aluminum honeycomb panels

/Article/zhuanyedelvfengwoban_1.html