Delivery inspection of honeycomb aluminum plate

AccordingHoneycomb aluminum plate的复合技能源自现代航空的科技成果，分量更轻，但板材的强度更高。使用高温复合和面板热压技能，保证板材的整体性、强度和平整度。

According to the testing standards, each batch of aluminum veneer Products shall be subject to factory inspection. Inspection items include: appearance quality, dimensional deviation, film thickness, gloss deviation, adhesion, acid resistance, mortar resistance, solvent resistance, sealing quality, impact resistance, and welding nail connection.

11. Aluminum veneer group batch rules: the same variety, the same color and the same production batch shall be used for factory inspection.(continuous production)The actual delivery volume constitutes an inspection batch.

2Aluminum veneer sampling method: appearance quality, welding nail connection should be checked piece by piece.;Sampling for dimensional deviation, film thickness and gloss deviation inspection shall be carried out as specified.;Adhesive, acid resistance, mortar resistance, solvent resistance, sealing quality, impact resistance performance inspection each batch of two pieces of Products for inspection.

32. Rules for determination and re-inspection of aluminum veneer: if one or more properties of the inspection results are unqualified, double sampling shall be taken from the batch for re-inspection. If one or more properties of the samples are still unqualified in the re-inspection results, the batch shall be determined to be unqualified. If the appearance quality is unqualified, the single piece is unqualified. When the dimensional deviation, film thickness and gloss deviation inspection exceed the upper limit of unqualified Products specified in, the batch shall be judged as unqualified. However, the supplier is allowed to inspect block by block, and the qualified ones will deliver the goods.

2. aluminum veneer signs, packaging, transportation, storage and accompanying documents.

13. Marks: aluminum veneer Products of each packaging unit shall be marked with the following marks: company name, product name, product mark, production batch number, color and coating type, aluminum grade, trademark, production date, production or installation direction, quantity and quality inspection mark if there are direction requirements.

2Packaging: Products shall be packaged separately. The decorative surface of each panel shall be covered with a protective film.;The packing box shall have sufficient strength to ensure that it will not be damaged during transportation, handling and stacking, and the Products shall not move in the box.;Product certificate and packing list shall be provided in the packing box.

3Transportation: Handle and handle with care during transportation and handling. Drop and throw are strictly prohibited to prevent product damage.

4Storage: The product should be stored in a dry and ventilated place to avoid high temperature and sun and rain. It should be piled up separately according to variety, specification and color, and prevent surface damage.

5The accompanying documents include: product certificate, packing list and application guide.

Recommended article:

Double metal system for honeycomb aluminum plate

/Article/fengwolvbanshuangcen_1.html

hot-pressed composite material for aluminum honeycomb panel

/Article/lvfengwobanreyafuhec_1.html

Development of Honeycomb Aluminum Sheet Construction Industry

/Article/fengwolvbanjianzhuye_1.html