What are the advantages of metal honeycomb panels for indoor partitions?

With the metal honeycomb panel as the partition, it breaks the traditional partition mode in the past, and has won the market share of China\'s office space with its noble, fresh and elegant style. In addition, metal honeycomb panel manufacturers use aluminum honeycomb panels as partitions, which have the following performance advantages:

1. Fire prevention: aluminum plate is non-combustible material.

2. Corrosion resistance: The surface of the aluminum honeycomb panel is treated with epoxy fluorocarbon, which has strong corrosion resistance. Salt spray for 48 hours without pinhole. Cracks. No blistering.

3. Environmental protection: Honeycomb panels are pure aluminum Products, do not volatilize any harmful gases, non-radioactive, recyclable, environmentally friendly Products.

4. The aluminum honeycomb panel is easy to disassemble and assemble without damaging the plate. Because it is light weight. It is easy to transport and can be transported to different places for reuse. This is unmatched by other partitions.

What are the precautions for metal honeycomb board gluing?

Metal honeycomb panel manufacturer Metal honeycomb panel has been widely used due to the combination of the characteristics of the stone itself and the honeycomb panel processing technology. There are 6 key points in glue maintenance:

1. Tear off the folded part of the protective film on the surface of the honeycomb panel, and press the folded part of the 90 ° angle to print the paper. The masking paper shall be folded into a 90 ° angle at the word glue seam. The masking paper of the whole plate is in place at one time and cleaned vigorously to avoid wrinkling of the masking paper.

2. filled with foam round beech, requiring dense and straight.

3. When filling glue, walk in a straight line, from top to bottom, from left to right, one at a time.

4. According to the principle of glue injection, the glue should be scraped to the end at one time, and the glue should be scraped slowly at the word interface.

5. Tear off the masking paper, tilt outward by 45 °, and concentrate the torn masking paper in the dustbin to avoid environmental pollution.

6. After the weather-resistant adhesive is dry, tear off the outer protective film when sweeping the tail, and wipe the dust around with a dry cloth.