Have you ever understood the three factors that affect the construction effect of aluminum veneer?

Everyone knows that the installation of aluminum veneer is a practical work, and various problems will be encountered during the installation process. Among these problems, aluminum veneer suppliers are the most common problems. What are the common problems of aluminum veneer? Let\'s learn about it together.

1, do not pay attention to product quality, take shortcuts. From the point of view of material selection, the employees of the enterprise did not strictly control the use of those inferior raw materials. In the process of acceptance, the staff were negligent, the attitude was not rigorous, and some problems such as warping of aluminum veneer and length error of aluminum veneer were ignored.

2. Insufficient preparation. If the embedded parts deviate from the installation reference line during installation, the embedded parts cannot be used as the installation reference, and the measurement link is not tight. This will seriously affect the processing of the following links.

3, the staff attitude is wrong. Some employees have improper working attitude, perfunctory work, lax precision control when installing keels, and unclear product acceptance evaluation standards, which will seriously affect the progress of the project. In the traditional aluminum veneer installation process, these problems may not be obvious, but if the installation of Products with higher technical requirements, such as curved aluminum veneer, it will become obvious and seriously affect the construction progress.

All in all, the installation of aluminum veneer should not only be ready, but also fully done. Every installation detail should attract the attention of workers and be constructed in strict accordance with the specifications. Whether it\'s aluminum veneer. Keel. The installation of embedded parts or the final gluing, can not go wrong. Sometimes, a small detail has a big impact on the whole project.