In-depth analysis of factors affecting the performance of honeycomb aluminum sheet

In today\'s construction industry, honeycomb aluminum sheet is a more popular building material, in the case of market changes, more and more favored by the market. Then this article will give you a description of the material characteristics of honeycomb aluminum sheet, I hope to help you!

1. aluminum honeycomb decorative board is generally made of aluminum honeycomb decorative board 3003, 5005 and other brands, and the alloy composition of 1100 plate is low. Decorative surfaces shall be sprayed or rolled with polyester or fluorocarbon paint. Spraying board shall be adopted for exterior wall panel, and the coating thickness shall be greater than 40 microns. This is the only way to ensure the durability of the coating. Before painting, the surface of the aluminum plate should be strictly anodized to ensure sufficient adhesion and bonding strength with the honeycomb core. The coating of the plate shall comply with the national standard YS/t429.2-2000.

2. aluminum backplane aluminum honeycomb panel backplane should be made of the same material as the board surface. The surface layer shall be anodized and the side exposed to air shall be coated with a protective layer. The coating can be made of polyester, epoxy, acrylic and other materials to prevent the aluminum plate from being corroded by long-term exposure to the air.

3. honeycomb core aluminum core material Aluminum honeycomb core material is made on the aluminum honeycomb core production line using aluminum foil and special honeycomb connection glue. The main factors that determine the performance of honeycomb core materials are the specifications of aluminum foil, gap glue and honeycomb.

Then there are some basic factors affecting the honeycomb aluminum plate, for everyone to do some interpretation, I hope you have a clearer understanding and understanding!