What are the differences between stone aluminum honeycomb panels and stone aluminum honeycomb panels

　　What are the differences between stone aluminum honeycomb panels and stone aluminum honeycomb panels | Hot Information | Kaimai Metal Building Materials

First of all, stone is used as building decoration materials, which can create a gorgeous and elegant, atmospheric and beautiful decorative surface. All kinds of stone decoration materials have always been loved by the market. Stone honeycomb panel is an ideal decorative material that can maintain the decorative texture of natural stone and improve the safety of stone decoration. The stone honeycomb board has the characteristics of light weight and can meet all kinds of modeling design.

　　石纹aluminum honeycomb panelIt is a new type of composite material with sandwich structure, from top to bottom two layers of aluminum plate through adhesive and aluminum honeycomb core composite material. Stone-grain aluminum honeycomb panels are usually coated with fluorocarbon coating or polyester coating. Fluorocarbon coating is widely used outdoors due to its good weather resistance and self-cleaning, and polyester coating is used indoors. Stone grain aluminum honeycomb panel can be made into light weight, high strength, good rigidity, the plate is very flat, can be used for structure, cushion, partition and decoration occasions, such as can be used for curtain wall, building partition, sound absorption panel, ship, car, etc. In addition to the quality of the selected material, the stone grain aluminum honeycomb panel mainly depends on the welding quality and the peel strength of the key technical indicators.

Two stone grain aluminum honeycomb panel features: 1, light weight, small installation load;

2. High flatness, not easy to deform, high safety factor;

3. It has good sound absorption performance and heat insulation performance;

4. Compared with stone grain aluminum honeycomb panels, the cost is low, but the weight per square meter is larger.

5, more ornamental.

The stone honeycomb aluminum plate is made of 5-7mm natural stone and aluminum honeycomb plate, and is equipped with a special installation system, which is easy and quick to install. In order to meet the market demand, the curtain also developed a stone honeycomb board. The stone honeycomb panel adopts special surface treatment to create a decorative surface of imitation stone, which can imitate the texture of all kinds of stone to meet the diversified decoration needs.

Stone honeycomb panel has the following characteristics: 1. Light weight: the thinnest marble composite panel can be only 5mm thick (composite with aluminum honeycomb panel). The commonly used composite tile or granite is only about 12mm thick, which saves a lot of costs for transportation. It is the best choice when there is a load limit on the building.

2, improved strength: marble and ceramic tiles, granite, aluminum honeycomb panels and other composite, its bending, bending, shear strength has been significantly improved, greatly reducing the transport, installation, use of the process of damage rate.

3, anti pollution ability: ordinary marble original board (full body board) in the installation process or after the use of the process, such as wet paste with cement, it is likely that six months or a year later, the marble surface of a variety of different discoloration and stains, very difficult to remove. The composite board avoids this situation because of its harder and denser bottom plate and a thin layer of glue.

4. It is easier to control color difference: because the marble composite board is cut into 3 or 4 pieces with 1m2 original board (full-body board) and becomes 3m2 or 4m2. The 3, 4m2 pattern and color is almost 100% the same, so it is easier to ensure the consistency of the color and pattern when used in large areas.

5. Easy installation: Due to the above characteristics, during the installation process, regardless of weight, easy to break (strength, etc.) or color separation splicing, the installation efficiency and safety are greatly improved, and the installation cost is also reduced.

6. Break through the forbidden zone: There is no problem with ordinary original panels (full-body panels) for marble decorative parts, regardless of interior and exterior walls, floors, window sills, porches, desktops, etc. Only no decoration company dares and cannot take this risk for ceilings, whether marble or granite. And marble and aluminum-plastic plate, aluminum honeycomb bonding composite board will break through the stone decoration of the forbidden zone. Because it is very light, the weight is only 1/5 to 1/10 of the whole body plate. If you want to decorate the ceiling with stone, it must be.

7, sound insulation, moisture-proof: composite panels made of aluminum honeycomb panels and marble, because of its equal six-sided hollow aluminum bee core made of sound insulation, moisture-proof, heat insulation, cold performance. Therefore, these characteristics are far beyond the full body plate does not have the performance characteristics.

8, energy saving, consumption reduction: stone aluminum honeycomb composite panel because of its sound insulation, moisture, heat preservation performance, therefore, in the indoor and outdoor installation can greatly reduce the consumption of electric energy and heat energy.

9, reduce costs: because the stone composite material is thinner and lighter, in the transportation and installation will save a part of the cost, and for the more expensive stone varieties, made of composite panels are different degrees than the original plate of the finished plate price low cost.